Author Topic: Planex sanding paper question  (Read 1517 times)

0 Members and 1 Guest are viewing this topic.

Offline aas

  • Posts: 123
Planex sanding paper question
« on: July 17, 2015, 02:52 AM »
I have a Skil masters drywall sander (I don't do enough to justify a Planex!), but would like to use the Planex papers if the holes line up. The sanding heads are the same size, there are 8 holes that have a diameter of about 10,5mm and are on a diameter of about 69mm.
I have tried to search for this info online with no luck. If anyone could measure theirs, it would be greatly appreciated.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Holmz

  • Posts: 4010
Re: Planex sanding paper question
« Reply #1 on: July 17, 2015, 04:30 AM »
If the Mirka screens attach then you do not need to worry about holes.
The screens also last a long time.
The Mafell version say "By Mirka", so that gives you another choice.

I just used them on some paint and drywall plaster.
Some of the paint gummed up, but the dry plater want was eaten up quickly.

Offline aas

  • Posts: 123
Re: Planex sanding paper question
« Reply #2 on: July 17, 2015, 05:17 PM »
Thanks, good idea. I'll get some 320 grit to try.