« previous next »
Pages: [1]   Go Down

Author Topic: Metabo ASR 35 hose to Festool Tools ?  (Read 1391 times)

0 Members and 1 Guest are viewing this topic.

Offline Jack01

  • Posts: 57
Metabo ASR 35 hose to Festool Tools ?
« on: May 30, 2022, 12:10 PM »
I am considering buying a used Metabo ASR 35  as a back up vacuum for my CT 26 
Is the hose comes with Merabo ASR 35 compatible to Festool tools ? I will be mostly using for festool Rotex 150

Also anyone have experience with Metabo ASR 35 ? what is the noise level? is this loud?
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Peter_C

  • Posts: 1375
Re: Metabo ASR 35 hose to Festool Tools ?
« Reply #1 on: May 30, 2022, 01:13 PM »
Never seen one in person, but I just looked it up and it appears to come with a grey hose which is NOT anti-static. Hoses should be universal though.

To me the most important things are:
Tool triggered auto start (Which most seem to have today)
Bluetooth remote (As I use mostly 5 meter hoses)

If a great price is offered I would take it though as hoses are available, and who couldn't use a dedicated dust collector for some piece of equipment.


Logged

Offline FestitaMakool

  • Posts: 1346
Re: Metabo ASR 35 hose to Festool Tools ?
« Reply #2 on: May 30, 2022, 01:52 PM »
From what I’ve seen, all tool end type from Metabo are the same as Festool, an added bonus is that also the vac end is the same as Festool’s.
I know the little battery operated one has a tool end that fits Festool tools perfectly (it’s ribbed inner) - Even that hose has a vac end that fits Festool - and of course the other way around.

Metabo’s antistatic hoses are red I believe. Look out for a red hose.
Logged
“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”

Offline Tom Gensmer

  • Posts: 882
  • Residential Remodeler in Minnesota
Re: Metabo ASR 35 hose to Festool Tools ?
« Reply #3 on: May 30, 2022, 02:02 PM »
The tool-end of the Metabo (Starmix) ASR 35 hose fits standard 27mm connections.

The vac-end of the Metabo (Starmix) ASR 35 hose has a proprietary twist-lock connection and DOES NOT work with Festool vacs.

The Grey Starmix hoses are non-antistatic, the red hoses are anti-static.

I have, for the most part, transitioned my company over to the Starmix vacs (mix of Mafell and Metabo livery), and generally use Festool hoses (27mm and 36mm), with Mirka tool-end ends on the 27mm hoses.

In my experience, the Starmix vacs offer the best combination of size and performance. Some folks are put-off by the filter cleaning mechanism, but I prefer it to vacs that "thump" the filter every 15 seconds, whether it needs it or not.

For what it's worth, if the Starmix vacs didn't exist I'd give a look at the Nilfisk/Makita/Milwaukee ATTIX vac. I have the Nilfisk and it's a solid performer.
« Last Edit: May 30, 2022, 02:07 PM by Tom Gensmer »
Logged
CT-MIDI, C-18, RO-150, RO-90, OF-1010, OF-1400, MFK-700, MFK-700EQ/B, EHL-65, DTS-400, LS-130, MFT/3 (x4), MFT/Kapex (x3), KA 65 Conturo, endless Systainers

Offline Jack01

  • Posts: 57
Re: Metabo ASR 35 hose to Festool Tools ?
« Reply #4 on: May 30, 2022, 06:36 PM »
Thanks for quick feedback
This is helpful, before I make the 70 mile trip to see this unit, I wanted to make sure it will work with Festool tools.
Again appreciate the help.
Logged

Offline rst

  • Posts: 3046
Re: Metabo ASR 35 hose to Festool Tools ?
« Reply #5 on: May 31, 2022, 07:31 PM »
I have a Metabo ASR that I use Fein and Festool hoses with, I was not thrilled with the Metabo hose
Logged

Offline Jack01

  • Posts: 57
Re: Metabo ASR 35 hose to Festool Tools ?
« Reply #6 on: June 07, 2022, 09:17 AM »
I did pick up this Metabo ASR- 35 HEPA , good condition
The seller use this for dry wall work so it was dirty, after 3 hours of cleaning it is looking good.
I will be using only for woodworking
The suction is great, I can control the suction
Tool activated.
Hose is 27 MM and fits festool tools.
The hose is nor anti static so I need to find a solution.
This is similar to Festool CT 36 E AC HEPA

I need to get new bags and considering345286-0 flees bag
Logged
Pages: [1]   Go Up
« previous next »