Author Topic: Vortex extractor with 26 CTL  (Read 2203 times)

0 Members and 1 Guest are viewing this topic.

Offline paulkane1

  • Posts: 17
Vortex extractor with 26 CTL
« on: January 03, 2017, 02:23 PM »
I've a Cleantex CTL 26 extractor,what are benefits of placing a Vortex system,Could I use it only Woodturning Lathe?what Vortex system is recommended,I live in the U.K.,so I need a retailer here to buy a Vortex system from.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline antss

  • Posts: 1453
Re: Vortex extractor with 26 CTL
« Reply #1 on: January 03, 2017, 02:46 PM »
I don't think the ct26 is powerful enough for capturing shavings while turning anything more than pen blanks.

If you're turning bowls, spindles, newels, ect.... you best look at a full sized dust collector with 3+ H.P.