Author Topic: Domino DF 500 on thin board 10 MM  (Read 340 times)

0 Members and 1 Guest are viewing this topic.

Offline Jack01

  • Posts: 49
Domino DF 500 on thin board 10 MM
« on: July 24, 2022, 12:50 PM »
I am in process of joining 2 thin boards which are 10 mm in height.
I started working on Domino DF 500 fence and realize  the fence will not adjust to 10 mm
Lowest I can go is 15 mm

Is there any trick to adjust to 10 mm ?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ChuckS

  • Posts: 3712
Re: Domino DF 500 on thin board 10 MM
« Reply #1 on: July 24, 2022, 12:56 PM »
Add (double-face tape) a shim of appropriate thickness to the bottom of your fence, something like this (the ply in the image is 5mm):

« Last Edit: July 24, 2022, 12:58 PM by ChuckS »

Offline Jack01

  • Posts: 49
Re: Domino DF 500 on thin board 10 MM
« Reply #2 on: July 25, 2022, 12:40 PM »
Thank you for your help, it did worked.