Author Topic: 36mm anti-static hose connector dismantle/reconnect  (Read 316 times)

0 Members and 1 Guest are viewing this topic.

Offline Pbellamy

  • Posts: 1
36mm anti-static hose connector dismantle/reconnect
« on: February 06, 2023, 02:40 PM »
Hey all,

I have a new 36mm anti-static hose. I want to thread this through my work cabinet to an enclosed separator and then on to my ct36.

I'm trying to take the connector off to thread the hose through a hole so the end cant slip back.

I have taken the cover off the connector but the anti-static hose is tight. On non antistatic I turned counter clockwise and the hose came off.

Whats the trick with the antistatics - Pull, twist, clockwise, anti clockwise? How do I get the connector off without doing damage?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline NiteWalkerGR

  • Posts: 171
Re: 36mm anti-static hose connector dismantle/reconnect
« Reply #1 on: February 06, 2023, 05:47 PM »
Once you push the tabs in and remove the outer sleeve, the inner sleeve rotates clockwise to remove. It's left hand threaded.