Author Topic: Sys Storage Toolbox Bit Holder  (Read 1592 times)

0 Members and 1 Guest are viewing this topic.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 9198
  • Finger Lakes Region, NY State , USA
Sys Storage Toolbox Bit Holder
« on: October 06, 2019, 08:52 PM »
Made these bit holders for my toolbox. Makes use of some dead space and a convenient location for bits.

     I used pieces of PVC. About 3/8" thick and a 1/2" wide.  Mark and drill 9/32" holes through , then super glue in place. You can also use the outer two holes for 2" bits as long as they are the reduced shaft type. After the holder is glued in drill a smaller diameter hole through the bottom Systainer plastic. Make sure it is centered. Can't do it for all the holes because the cantilever mechanism gets in the way.


                           




Seth
« Last Edit: October 06, 2019, 08:55 PM by SRSemenza »

Offline Michael Kellough

  • Posts: 4727
Re: Sys Storage Toolbox Bit Holder
« Reply #1 on: October 06, 2019, 08:54 PM »
I like it and I’m sure you will too.

Offline Systainer.Store

  • Retailer
  • *
  • Posts: 181
    • systainer.store
Re: Sys Storage Toolbox Bit Holder
« Reply #2 on: October 07, 2019, 05:50 AM »
Very nicely done!

Online Cheese

  • Posts: 7221
Re: Sys Storage Toolbox Bit Holder
« Reply #3 on: October 07, 2019, 09:01 AM »
Slick...as soon as you open the box, they're up front & center. Now the GRK's finally have a permanent home.  [cool]

Offline Dick Mahany

  • Posts: 551
Re: Sys Storage Toolbox Bit Holder
« Reply #4 on: October 07, 2019, 09:08 AM »
Very clever and useful idea ! [smile]

Offline mike_aa

  • Posts: 1163
Re: Sys Storage Toolbox Bit Holder
« Reply #5 on: October 07, 2019, 10:35 AM »
Brilliant!   [thumbs up]

Offline Gerald_D

  • Posts: 333
Re: Sys Storage Toolbox Bit Holder
« Reply #6 on: October 07, 2019, 10:50 AM »
Seth,
Love the idea!  Will have to add that to my toolbox.

Regards,
Gerald
Gerald
I have Festools- Big and Small and a few other tools

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 9198
  • Finger Lakes Region, NY State , USA
Re: Sys Storage Toolbox Bit Holder
« Reply #7 on: October 07, 2019, 11:01 AM »
The toolbox is my grab and go for my own household repairs and minor tasks at customers places. Things that don't require the full kit. As such it has basic tools including a quick change screwdriver. Hence a variety of handy bits.

Seth

Offline neilc

  • Posts: 2817
Re: Sys Storage Toolbox Bit Holder
« Reply #8 on: October 07, 2019, 09:42 PM »
Great idea.  I'll borrow it! 

Agree - the cantilevered design is a great go-to for repairs and simple projects around the house.

Offline dlu

  • Posts: 184
Re: Sys Storage Toolbox Bit Holder
« Reply #9 on: October 07, 2019, 10:56 PM »
What everybody else said -- very clever. Thanks for sharing.