Author Topic: Screwdriver Storage  (Read 3388 times)

0 Members and 1 Guest are viewing this topic.

Offline oberkorn

  • Posts: 40
Screwdriver Storage
« on: April 18, 2021, 07:21 PM »
I may have become a bit obsessed about getting these right, but also making sure that if my partner "borrows" one of these from this box, that he knows the right place to put them back. I demand order!!! LOL

I ended up just printing scale photos of each, putting the model number on each, then die-cutting them from the print. I traced the "holes" left from the die cutting, as well as using them for spacing to make the holes, then inserted the cutout of each driver into each hole. There's a little room left over (in case you were wondering about the spacing on the right) for a Wera Star magnetizer/demagnetizer. I might be on an OCD spectrum, but it turned out almost exactly as I envisioned!



« Last Edit: April 24, 2021, 07:42 AM by oberkorn »

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 10108
  • Finger Lakes Region, NY State , USA
Re: Screwdriver Storage
« Reply #1 on: April 19, 2021, 12:06 AM »
OCD or not, hard not to like it  [smile]

Interesting cutting method using the pictures.

Seth

Offline Greg Powers

  • Posts: 2330
  • Metric convert
    • Stargate Unofficiial
Re: Screwdriver Storage
« Reply #2 on: April 19, 2021, 08:38 PM »
Someone likes ORDER  [big grin]

I always tell my kids "A place everything and everything in its place". 
Greg Powers
Size:XL

Offline Crazyraceguy

  • Posts: 2086
Re: Screwdriver Storage
« Reply #3 on: April 20, 2021, 06:04 PM »
I like that a lot. It definitely appeals to the OCD in me, even though I deny that it is a disorder.....lol
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1010F
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75
Shaper Origin/Workstation/Plate
MFT clamps set
Installers set
Centrotech organizer set
Socket/Ratchet set

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 10108
  • Finger Lakes Region, NY State , USA
Re: Screwdriver Storage
« Reply #4 on: April 20, 2021, 11:32 PM »
I am thinking a three drawer Sortainer would be good for that screwdriver set up.  [wink]

Seth

Offline oberkorn

  • Posts: 40
Re: Screwdriver Storage
« Reply #5 on: April 21, 2021, 04:58 PM »
I am thinking a three drawer Sortainer would be good for that screwdriver set up.  [wink]

Seth

I was thinking I could do even better by using SYS-AZ drawers with no Systainers, and foam them up... Then I can make some small units that can be mounted to my homemade sysports or another work bench that currently has some metal toolboxes.

Offline Coen

  • Posts: 1904
Re: Screwdriver Storage
« Reply #6 on: April 24, 2021, 08:16 AM »
Yes, looks very nice. But euh... it also consumes a _LOT_ of space. And now you can't see the inscription on the bottom of the grip.

I have PB Swiss Tools screwdrivers, they have a way bigger colorcoding. So dumping all the screwdrivers in a giant pile isn't really a problem.



Now, sadly the Germans (ok, PB Swiss is not really from Germany but from Switzerland) didn't standardize the colorcoding, so while PB Swiss uses yellow for PH, Wera uses it for SL.  :-\

Offline KCITools

  • Retailer
  • *
  • Posts: 16
    • Kaizen Cases and Inserts
Re: Screwdriver Storage
« Reply #7 on: May 07, 2021, 02:12 PM »
Love the Kaizen Foam Insert in the Systainer!

If anyone is interested we are an official supplier of Kaizen Inserts and have very large stock on Tanos Systainers!

kaizencasesandinserts.com
Systainers (T-Loc, Gen 3), Kaizen Inserts, and Festool Accessories all Available at our Store, KCI Tools.

kaizencasesandinserts.com