Author Topic: Does Anyone have a plan/drawing for the T-Lock and Sys3 systainers  (Read 2494 times)

0 Members and 1 Guest are viewing this topic.

Offline Wood_Slice

  • Posts: 102
As stated above I want to make one of my systainers for sorting my D125 sandpapers I could use a cardboard and try to get it close but I rather have it perfect [big grin]. So does anyone have a picture file I can print?
DF 500 + Assortments | ETS EC 125/3 EQ | CT MIDI + CT-Fi| MFT3 + Elements| Installer's Set | TS55-REQ |

Offline Bob D.

  • Posts: 2295
This has been brought up before. I know there is at least one thread about it and people have posted what you are looking for or links to where you can find it. I think if you do some searching you will find what you want.
-----
It's a table saw, do you know where your fingers are?

Offline squall_line

  • Posts: 776
I gave in and decided to just purchase the Systainer with the insert already in it.  I think the insert itself is available as a separate part, but I'm not 100% sure.

Offline Systainer.Store

  • Retailer
  • *
  • Posts: 260
    • systainer.store
Oh the pain.  I'm trying to make the point to Tanos that releasing a few drawings, svg, dxf type assets for the interior inserts would help in building the community. 
« Last Edit: March 10, 2021, 12:54 PM by Systainer.Store »

Offline Wood_Slice

  • Posts: 102
Oh the main.  I'm trying to make the point to Tanos that releasing a few drawings, svg, dxf type assets for the interior inserts would help in building the community.

That would be fantastic. Thank You Very Much
DF 500 + Assortments | ETS EC 125/3 EQ | CT MIDI + CT-Fi| MFT3 + Elements| Installer's Set | TS55-REQ |

Offline madjalapeno

  • Posts: 41
TS55C ◉ CT15 ◉ Kapex KS 120 REB ◉ Domino DF500 ◉ PS 420 EBQ ◉ RO 125 FEQ ◉ DTS 400 REQ-Plus

Offline Coen

  • Posts: 1092
Oh the pain.  I'm trying to make the point to Tanos that releasing a few drawings, svg, dxf type assets for the interior inserts would help in building the community.

That would be golden. Lots of companies offer the full CAD file of their products.

Offline Wood_Slice

  • Posts: 102
does this help?

https://systainer.store/pages/resources

Not really, the interior template is quite different.
DF 500 + Assortments | ETS EC 125/3 EQ | CT MIDI + CT-Fi| MFT3 + Elements| Installer's Set | TS55-REQ |

Offline ToolGuy42

  • Posts: 22
Re: Does Anyone have a plan/drawing for the T-Lock and Sys3 systainers
« Reply #8 on: September 01, 2021, 05:59 PM »
Also looking for accurate plans of Sys3 Systainers. If anyone comes across a CAD file of any of them let me know! As of now I can only find T-Loc versions but no Sys3 CAD files.

Offline squall_line

  • Posts: 776
Re: Does Anyone have a plan/drawing for the T-Lock and Sys3 systainers
« Reply #9 on: September 01, 2021, 06:14 PM »
Also looking for accurate plans of Sys3 Systainers. If anyone comes across a CAD file of any of them let me know! As of now I can only find T-Loc versions but no Sys3 CAD files.

@WastedP recently released an SVG for the lid of the Sys3 L models.  I wonder if he's done anything with the interior of the Mediums...

Offline WastedP

  • Posts: 389
Re: Does Anyone have a plan/drawing for the T-Lock and Sys3 systainers
« Reply #10 on: September 01, 2021, 08:18 PM »
I did get a couple of systainer 3 M cases at the same time as the L's, but I haven't done any organization in them yet.  If that changes, you'll see it here (or Shaper Hub) first.

Offline eherrmann

  • Posts: 1
Re: Does Anyone have a plan/drawing for the T-Lock and Sys3 systainers
« Reply #11 on: September 15, 2021, 07:01 PM »
First time poster, long time lurker. I've been working on some inserts for the new systainer3 M line, and figured others could benefit from my SVG files. These are based on an M112 (haven't checked it yet against the taller M line systainers, but I do plan on working my through the rest if there are differences, which I'm sure there are since there were with the T-Locs). I Modified @WastedP 's L lid to fit the M width as well (hope you don't mind).

Layer 0 - base layer with molded X shape cut out
Layer 1 - between layer 0 and 24mm up
Layer 2 - from 24mm to top layer
Layer 3 - top layer with cutouts for lid protrusions.
Lid - Lid

*edited: Layer 0 and Layer 1 were tight fits and needed to be slid in at an angle under the lid side hinges, which can be problematic if you're doing thick inserts, so I made alternate versions that have enough clearance around the hinges to drop straight in. Also attached zip file instead of individual links.
« Last Edit: September 16, 2021, 12:51 PM by eherrmann »

Offline Systainer.Store

  • Retailer
  • *
  • Posts: 260
    • systainer.store
Re: Does Anyone have a plan/drawing for the T-Lock and Sys3 systainers
« Reply #12 on: September 15, 2021, 08:19 PM »
Nice job!  At some point I'll get the CNC or Shaper fired up and give these a try.

Offline Ebuwan

  • Posts: 25
Re: Does Anyone have a plan/drawing for the T-Lock and Sys3 systainers
« Reply #13 on: September 24, 2021, 11:34 AM »
I just downloaded em too and will try with Shaper. Thanks for this!