Author Topic: Custom Systainer Label PDF for Everyone (Read 34759 times)

duburban · « **Reply #30 on:** April 03, 2019, 03:06 PM »

Hey,

Did you print these as stickers? or just paper?

Thanks

DashZero · « **Reply #31 on:** April 03, 2019, 03:18 PM »

Quote from: duburban on April 03, 2019, 03:06 PM

Hey,

Did you print these as stickers? or just paper?

Thanks

I printed them on paper and laminated them.

Cheese · « **Reply #32 on:** April 03, 2019, 05:01 PM »

Quote from: DashZero on April 03, 2019, 02:19 PM

I print them on a color laser, and then trim them and then laminate them. I have thought about buying a printer that prints color on plastic cards.

There are trays available that fit many printers and then the cards are simply placed in the tray and printed. Check to see if there is an auxiliary tray available for your printer.

badtoytrd · « **Reply #33 on:** April 04, 2019, 06:14 AM »

THANK YOU! THANK YOU! THANK YOU!

DashZero · « **Reply #34 on:** April 04, 2019, 06:28 PM »

Quote from: badtoytrd on April 04, 2019, 06:14 AM

THANK YOU! THANK YOU! THANK YOU!

Your welcome. It was a pleasure.

badtoytrd · « **Reply #35 on:** April 04, 2019, 08:26 PM »

Printed them up and they look great. I will try to post a few pictures when I get a minute.

DashZero · « **Reply #36 on:** April 05, 2019, 03:01 PM »

HOMERIGHT C800971.M

DashZero · « **Reply #37 on:** April 05, 2019, 03:20 PM »

MAKITA XTR01T7

DashZero · « **Reply #38 on:** April 06, 2019, 02:11 PM »

MAKITA XJP03Z

DashZero · « **Reply #39 on:** April 06, 2019, 02:29 PM »

MAKITA XPS01Z

DashZero · « **Reply #40 on:** April 06, 2019, 02:40 PM »

Milwaukee 2731-20

DashZero · « **Reply #41 on:** April 06, 2019, 03:50 PM »

5" SANDING ABRASIVES

Bob D. · « **Reply #42 on:** April 07, 2019, 06:41 AM »

Given the recent thread about putting a First Aid Systainer together some nice First Aid label would be great.

Route24Design · « **Reply #43 on:** April 08, 2019, 07:28 AM »

Is it possible to make one for the Bosch PR20EVS Colt router?

DashZero · « **Reply #44 on:** April 08, 2019, 05:00 PM »

See if this works for you.

DashZero · « **Reply #45 on:** April 09, 2019, 02:34 PM »

Milwaukee 2606-20 2656-20

Joort · « **Reply #46 on:** April 14, 2019, 03:56 PM »

I did a similar thing. Printing them, cutting them out and then laminating them.
My layout is very visual, showing the total tool and the main operating piece (see attachement).

Ivandog09 · « **Reply #47 on:** April 28, 2019, 03:02 PM »

I have the dcd995 20v drill and the dcf895 impact driver in one case and the dcs355 multitool and dcs335 jigsaw in another. Is that a possibility?

DashZero · « **Reply #48 on:** April 28, 2019, 03:40 PM »

Quote from: Ivandog09 on April 28, 2019, 03:02 PM

I have the dcd995 20v drill and the dcf895 impact driver in one case and the dcs355 multitool and dcs335 jigsaw in another. Is that a possibility?

Ok do you have any batteries or charges in each case you would like on the labels?

Ivandog09 · « **Reply #49 on:** April 28, 2019, 03:51 PM »

I have a 5 amp hour battery in each tool, no chargers in the cases though

DashZero · « **Reply #50 on:** April 30, 2019, 06:44 PM »

DCF895 DCD995 LABEL

Take a look and see if this is ok.

Thanks.

I updated this to be consistent with the other Dewalt labels with the Reserved symbol.

Ivandog09 · « **Reply #51 on:** April 30, 2019, 06:52 PM »

Thanks a lot! Are you on Instagram by chance? I'd love to follow you. Also do you have the jigsaw, multitool one? Amazing job

DashZero · « **Reply #52 on:** April 30, 2019, 06:58 PM »

DCS355B DCS335 LABEL

Here is the other.

DashZero · « **Reply #53 on:** April 30, 2019, 07:07 PM »

Quote from: DashZero on April 30, 2019, 06:58 PM

DCS355B DCS335 LABEL

Here is the other.

I updated the first one I did for you above to add the reserved symbol to be consistent, and put a word on a line above to look better. Sent you my instagram. thank you

DashZero · « **Reply #54 on:** April 30, 2019, 09:11 PM »

Here is a pdf label that I drew up that fits the T-LOC. I can add text or graphics or change color.

ghjaxman · « **Reply #55 on:** May 09, 2019, 10:53 AM »

Thanks for all of the Labels. Do you have one for a Fein Multi-Master?

DashZero · « **Reply #56 on:** May 09, 2019, 12:35 PM »

Quote from: ghjaxman on May 09, 2019, 10:53 AM

Thanks for all of the Labels. Do you have one for a Fein Multi-Master?

Thank you.

Let me know the model numbers of what you want on the label and I will make that one.

ghjaxman · « **Reply #57 on:** May 09, 2019, 02:28 PM »

FEIN FMM350QSL MultiMaster, like the other ones, a picture logo, etc. Thanks again.

JimH2 · « **Reply #58 on:** May 09, 2019, 02:48 PM »

Is there any interest in purchasing these on hard cards?

DashZero · « **Reply #59 on:** May 10, 2019, 01:08 AM »

FEIN LABEL - FMM350QSL