Author Topic: Combi Systainer compatibility with Sys-AZ drawer  (Read 840 times)

0 Members and 1 Guest are viewing this topic.

Offline Mustafa

  • Posts: 2
Combi Systainer compatibility with Sys-AZ drawer
« on: January 10, 2020, 01:21 AM »
Has anyone used a Combi Systainer (with a drawer at the bottom) with a SYS-AZ drawer? Are you able to open the Combi Systainer drawer while it is still in the AZ drawer?

Offline bluedog18

  • Posts: 9
Re: Combi Systainer compatibility with Sys-AZ drawer
« Reply #1 on: January 10, 2020, 11:37 AM »
No they don't work unless you slip in 1/4inch  plywood into sys-az drawer. Sledge had a video posted to Instagram about it. unfortunately I can't access Instagram at work, to post a link.

Offline GarryMartin

  • Posts: 1823
Re: Combi Systainer compatibility with Sys-AZ drawer
« Reply #2 on: January 10, 2020, 01:54 PM »
1/2 inch not 1/4 inch. I use a piece of 12mm MDF here in the UK.

https://www.instagram.com/p/BtwYf5CFcVy/

Offline Mustafa

  • Posts: 2
Re: Combi Systainer compatibility with Sys-AZ drawer
« Reply #3 on: January 11, 2020, 11:10 AM »
Thanks for the response guys. Now I know to leave room for the 1/2” plywood in my design.