Author Topic: CNC Router file... Systainer Drawers...  (Read 637 times)

0 Members and 1 Guest are viewing this topic.

Offline AtomicRyan

  • Magazine/Blog Author
  • *
  • Posts: 42
CNC Router file... Systainer Drawers...
« on: September 10, 2019, 05:25 PM »
Hey guys, I am working on another workbench and I'm wondering if anyone has gone to the trouble of creating a CNC file for creating a systainer drawer with routed areas for the feet like this:



Would be easy enough to do obviously, but just thought I'd check to see if anyone has done it...

Offline ColossusX

  • Posts: 195
Re: CNC Router file... Systainer Drawers...
« Reply #1 on: September 10, 2019, 07:16 PM »
I'd be interested too.  But so far I'm going the lazy way and using a hole saw for the foot cutouts. Plus I've contacted 3 local cnc router shops and have not heard back from any of them in regards to sys shelves and mft style tops

Offline Systainer.Store

  • Retailer
  • *
  • Posts: 114
    • systainer.store
Re: CNC Router file... Systainer Drawers...
« Reply #2 on: September 10, 2019, 07:51 PM »
Hi @AtomicRyan

I don't have 'CNC' files yet, in fact I'm thinking I'm just about to order a CNC so I can look at creating this items for myself and for the community.  I've played around some with a Shaper Origin and I recall seeing various Festool and Systainer posts on their community site.  Below is a link to a project, with SVG file, that someone used with the Shaper Origin to create what I think you are looking for.  I imagine taking the SVG and importing to generate the tool path/gcode should be quick work.

https://www.shapertools.com/hub/creators/59d417701ca17e0010a3e3b3/shares/5bc7e8a6c26d99001710335d

Offline neilc

  • Posts: 2728
Re: CNC Router file... Systainer Drawers...
« Reply #3 on: September 10, 2019, 11:22 PM »
Ryan -

If you don't have a Shaper and thus forum access, the SVG file is attached.

FOG won't support SVG file attachments so it's in a ZIP format.

Systainer-Store - good find!  I had seen it in the past there and glad to have it now.


neil

Offline AtomicRyan

  • Magazine/Blog Author
  • *
  • Posts: 42
Re: CNC Router file... Systainer Drawers...
« Reply #4 on: September 11, 2019, 06:25 PM »
Right on. Thank you sir...

I will run this as well as the one I made and see which fits best. Once done, I'll report back and post mine made for two deep systainers.