Author Topic: Sizing Piano Hinge For Inset Doors  (Read 507 times)

0 Members and 1 Guest are viewing this topic.

Offline dlu

  • Posts: 190
Sizing Piano Hinge For Inset Doors
« on: July 10, 2020, 04:39 PM »
I'm building some outdoor storage cabinets and I'd like to use a stainless piano hinge for the doors. I'd appreciate some advice on sizing. In the US common sizes (open widths) appear to be 1 1/2" and 2". The doors are (roughly) 38" and 79" tall. The cabinets are built from 3/4" nominal ACX plywood, the doors will be edge banded and inset.

What would be the appropriate size of hinge to use?
« Last Edit: July 10, 2020, 05:42 PM by dlu »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Sparktrician

  • Posts: 3982
Re: Sizing Piano Hinge For Inset Doors
« Reply #1 on: July 10, 2020, 04:48 PM »
Since you're going to make outdoor cabinets, I'd suggest using solid brass hinges to avoid rusting.  Brass piano hinges at that length will be scary-expensive.  [scared]   I'd suggest that you rethink and go with three appropriate shorter hinges per door.   [smile]
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

Offline dlu

  • Posts: 190
Re: Sizing Piano Hinge For Inset Doors
« Reply #2 on: July 10, 2020, 05:45 PM »
Since you're going to make outdoor cabinets, I'd suggest using solid brass hinges to avoid rusting.  Brass piano hinges at that length will be scary-expensive.  [scared]   I'd suggest that you rethink and go with three appropriate shorter hinges per door.   [smile]

I was planning on using stainless hinges. Definitely more than, standard butt hinges, but I like the look and am hoping that they will be stronger (I plan to hang some tools on the doors). And… I'm still curious about how one goes about selecting piano hinge   [smile]

Offline Peter_C

  • Posts: 877
Re: Sizing Piano Hinge For Inset Doors
« Reply #3 on: July 10, 2020, 08:59 PM »
304 hinges are actually pretty reasonable. ACX can still warp...

Offline tjbnwi

  • Posts: 6289
  • Cedar Tucky Indiana
Re: Sizing Piano Hinge For Inset Doors
« Reply #4 on: July 10, 2020, 09:56 PM »
You need a 1-1/2" hinge with 3/4" plywood. A 72" long one should work just fine.

Depending on how tight you are to the opening strike side, you may have to back cut the strike side of the door slightly.

Tom