Author Topic: Recommended edge banding for Festool Conturo?  (Read 270 times)

0 Members and 1 Guest are viewing this topic.

Offline Jasmin

  • Posts: 6
Recommended edge banding for Festool Conturo?
« on: May 09, 2022, 01:37 PM »
Hi,

First post here...  :)

I am working from a shared shop and we have a Conturo but I have never used it. Now I am planing to try it out. It gets very little use in our shop...

I saw a brief discussion about edge banding in a different thread but it didn’t get very far and I thought it would be great to have a separate thread.

Question: What edge banding do people use and recommend for the Conturo? Where do you buy it in the U.S.?

We have 2mm PVC banding in the shop but I am more interested in wood veneer. I saw three different types online of non-glued wood banding: a) fleece backed edging, b) kraft paper backed edging, and c) thick wood edge banding from laminated layers (1-3mm). What do you use, what do you prefer? How thick? Where do you order it?

Here are some of the sites I found: Edgemate (all three types), Oakwood Veneer (fleece only), Edge Supply (not sure, probably fleece), Veneersupplies.com (not sure, probably fleece)

Thanks!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline dmccririe

  • Posts: 45
Re: Recommended edge banding for Festool Conturo?
« Reply #1 on: May 09, 2022, 01:57 PM »
edgecoinc.com