Author Topic: New garage (uk)  (Read 5335 times)

0 Members and 1 Guest are viewing this topic.

Offline NorfolkNgood

  • Posts: 30
New garage (uk)
« on: January 27, 2013, 02:13 PM »
Hi all
 So, I have a bog standard double garage that I want to fit out as a workshop and motorcycle storage area ,( no cars) what can you recommend for lining the walls ? Want to have something white to reflect the light and this should compliment a suspended ceiling !
Cheers
Gav.
"Rules are for the interpretation of wise men and obedience of fools"

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Deansocial

  • Posts: 2114
Re: New garage (uk)
« Reply #1 on: January 27, 2013, 02:39 PM »
Paint

Offline jonathan-m

  • Posts: 331
Re: New garage (uk)
« Reply #2 on: January 27, 2013, 02:49 PM »
i'll just throw it out there, pegboard is always an option... [poke]
Festool: 2x MFT/3 // OF-1400 // MFS-400 & 700 // RO-90 // SYS-ROLL // VAC-SYS SET SE1 // CT-ASA CT 26/36/SB // KS 120 EB & UG-L & R //  VECTURO OS 400 EQ-Set  // DSG-AG 125 // DSC-AG 125 // DSC-AG 125 FH // HK 85 EB // HK 55 EB
Protool: 2x VCP 260 LE AC // PDP 20-2 // WCP-32
Mafell: MT55cc // P1cc // DD40P // Erika 85 Ec

Offline Mattywhit

  • Posts: 36
Re: New garage (uk)
« Reply #3 on: January 27, 2013, 02:58 PM »
Loads of this type of stuff about cheap as chips.

http://www.plasticproductsuk.co.uk/pvc-wall-cladding.php

Just about see it in back of this picture


Offline Tinker

  • Posts: 3721
Re: New garage (uk)
« Reply #4 on: January 27, 2013, 03:29 PM »
 [not worthy]
Wayne H. Tinker

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 9008
  • Finger Lakes Region, NY State , USA
Re: New garage (uk)
« Reply #5 on: January 27, 2013, 04:28 PM »
Think twice about using white pegboard for the whole space. The dark holes  / with white surface can give you some messed up depth perception when you look at the wall.   :o



Seth

Offline jmarkflesher

  • Posts: 248
  • Scoot
Re: New garage (uk)
« Reply #6 on: January 27, 2013, 06:13 PM »
Seth, That's only after you smoke pot from Woodstock. MARK
DEC 21st, 2012 TIC TIC TIC   WAS A DUD

Offline NorfolkNgood

  • Posts: 30
Re: New garage (uk)
« Reply #7 on: January 28, 2013, 03:20 AM »
You're right about the pegboard, sends my eyes crazy!!!like the plastic tongue and groove effect  [big grin]
"Rules are for the interpretation of wise men and obedience of fools"

Offline jonny round boy

  • Posts: 3227
Re: New garage (uk)
« Reply #8 on: January 28, 2013, 01:16 PM »
What construction is the garage? Single or double skin? Insulated?

Answers to the above would be relevant in order to answer your question...
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline NorfolkNgood

  • Posts: 30
Re: New garage (uk)
« Reply #9 on: January 28, 2013, 02:51 PM »
Double skin brick built ,was thinking to insulate before cladding the inside!
Gav.
"Rules are for the interpretation of wise men and obedience of fools"

Offline Mattywhit

  • Posts: 36
Re: New garage (uk)
« Reply #10 on: January 28, 2013, 05:50 PM »
Double skin brick built ,was thinking to insulate before cladding the inside!
Gav.

Batten wall off insulate voids ans staple PVC clad to battens job done really fast and neat to put up

Offline jonny round boy

  • Posts: 3227
Re: New garage (uk)
« Reply #11 on: January 28, 2013, 07:20 PM »
Double skin brick built ,was thinking to insulate before cladding the inside!
Gav.

Batten it out, insulation between, and then plasterboard over the top. Plasterboard is dirt cheap, much cheaper than anything else....
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline Mattywhit

  • Posts: 36
Re: New garage (uk)
« Reply #12 on: January 29, 2013, 04:32 AM »
Double skin brick built ,was thinking to insulate before cladding the inside!
Gav.

Batten it out, insulation between, and then plasterboard over the top. Plasterboard is dirt cheap, much cheaper than anything else....

If your going to do that option then buy your platerboard with insulation already on it

Offline Tinker

  • Posts: 3721
Re: New garage (uk)
« Reply #13 on: February 03, 2013, 10:39 AM »
By the time i was retireing from mason biz, we were learning the best way to insulate cellar walls, below or above grade, was to put the insulation on the outside of the wall.  That way, the concrete (or block or brick0 would become a "heat sink".  It didn't always look good with insulation outside of brick wall above grade.  With block and concrete, we were adding some sort of finish material to hide and protect the insulation where it was above grade.  In my own cellar, I had insulated inside the walls as the structure was already there and had been backfilled years before.  On one wall, i had finished it off with a layer of sheet insulation and a layer of brick between the foundation wall and the open area of the inside.  The rest of the walls never got finished that way as my back finally gave out and I got into the much less strenuous biz of landscaping. I only had to lift bags of fertilizer weighing 50# or move balled shrubs weighing 200# or 300#.  I did observe the wall where i insulated inside and then covered insulation with brick seems to be warmer during cold weather than other walls in the cellar area. Other walls, i insulated with 1/2" sheets and drywall but those areas, altho warmer than where no insulation at all, are cooler than where i lined with brick.
Tinker
Wayne H. Tinker