« previous next »
Pages: [1]   Go Down

Author Topic: Need help with vertical lift cabinet door hardware, please . . .  (Read 7665 times)

0 Members and 1 Guest are viewing this topic.

Offline Bill Hendrix

  • Posts: 72
Need help with vertical lift cabinet door hardware, please . . .
« on: January 29, 2011, 09:02 PM »
I need some help finding hardware for a bathroom cabinet door that is 34" wide by 22" high that will cover an "appliance-type garage".  I need a vertical lift system that will allow the door to lift out and up to clear as much of the 22" height as possible while staying parallel (more or less) and as close as possible to the cabinet above it as possible.  I looked at the Blum Aventis HL, but it seems to stick out too far from the cabinet above and seems to be limited to a 20" height, if I'm interpreting correctly.

Thanks!!!
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Chris Hughes

  • Posts: 572
Re: Need help with vertical lift cabinet door hardware, please . . .
« Reply #1 on: January 29, 2011, 11:34 PM »
Just a shot in the dark Bill, but try Salice.  I don't have my books with me but I can call my rep on Monday to find out if their lift will work.  They are on line if you would like to check this weekend.
Logged

Offline Gone

  • Posts: 925
Re: Need help with vertical lift cabinet door hardware, please . . .
« Reply #2 on: January 30, 2011, 06:46 AM »
According to Richelieu, a Blum dealer max. height is 22 + inches and looks like 8+ inches from front face of cab.

John

Thanx Jonny I needed that [scared] no one else will know.
« Last Edit: January 30, 2011, 06:54 AM by junk »
Logged

Offline jonny round boy

  • Posts: 3227
Re: Need help with vertical lift cabinet door hardware, please . . .
« Reply #3 on: January 30, 2011, 06:50 AM »
Quote from: junk on January 30, 2011, 06:46 AM
According to Richelieu, a Bum dealer...

 [thumbs up] [big grin] [big grin] [big grin]

Logged
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline Jon Hilgenberg

  • Posts: 1113
Re: Need help with vertical lift cabinet door hardware, please . . .
« Reply #4 on: January 30, 2011, 07:28 AM »
Try Hafele.  I've installed quite a few of these types, and I believe the brand is HUWIL.

JON
Logged
The more Festools I buy, the more money I earn.  The more money I earn, the more Festools I buy.  The more...
TS 55, TS 75, Domino, CT22, OF 2000, C12, CXS, RAS, Trion, Fogtainers!

Offline builderbob

  • Posts: 1373
    • RJP Remodeling
Re: Need help with vertical lift cabinet door hardware, please . . .
« Reply #5 on: January 30, 2011, 08:32 AM »
I've seen the Blum Aventos in action. They have several types...I believe 4 in terms of how they lift. One stays parallel, one goes up and over, one flips up and I forget the third. Not cheap, but Blum makes quality stuff!

Bob
Logged
Kapex, TS55, CMS GE, Carvex 420, Domino DF500, MFK 700, OF 2200, OF 1400, OF 1010, EHL65, RAS 115, RTS 400, RO150, ETS 150/3, ETS 125, CT 22 (2), CXS (2), C-15+3, T-12+3, PSB 300 & more MFT's than i can count!
Pages: [1]   Go Up
« previous next »