Author Topic: Looking for sheet goods supplier in southern New Jersey  (Read 6859 times)

0 Members and 1 Guest are viewing this topic.

Offline Ripcurl

  • Posts: 9
Hey everyone,

I am starting a furniture design business here in South Jersey and am having trouble finding a source for sustainable sheet goods.  I currently have an account with Fessenden Hall but their resources in this department are fairly limited.  I have been doing some searching with no real luck... I had talked about this a while back with a cabinet maker in the area, and he had mentioned another place similar to FH, but I cannot for the life of me remember, or find, what it was.  Any input/ suggestions would be greatly appreciated!

Thanks.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline GreenGA

  • Posts: 876
  • JR
Re: Looking for sheet goods supplier in southern New Jersey
« Reply #1 on: August 01, 2013, 09:23 PM »
There is a sheetgoods distributor in Delaware not far front the twin bridges. I may have their name somewhere in my files.

I know sheetgoods could also purchased from Mr. Roberts Lumber in/near Lawnside.
Never use a 2x4, when a 2x6 will do just as well.

SYS-Lites, CMS/GE, TS55, KAPEX, MFT/3, CXS Kit, C15 Set, C12 Set, T18 Set, Ti15 Set, CT48 w/Boom Arm, Carvex PSBC, HL850, HL65L, RO90, RTS400, DTS400, LS130, DX93, RO150, ETS 150/3, RAS 115/4E, RS2E, Domino 500 & 700 Sets, MFK700 Set, OF1010 EQ, OF1400, OF2000E+, MFS700, FS3000/2, LR 32-SYS+97" rail, 2011 Centrotec Set, Metric and Imperial Zobo Forstner Bit Set, VS600 Dovetail System, Guide Rail Kit, Parallel Guides, Tradesman Cleaning Set, Shinex, lotsa 'tainers (Sys, Sorts, Minis, Midis, Maxis. Attics, Classic, New and Blue).
Coming Attractions: Workcenter, NAINA when available.

Offline JerrySats

  • Posts: 154
Re: Looking for sheet goods supplier in southern New Jersey
« Reply #2 on: August 02, 2013, 08:23 PM »
I use Russel Plywood out of New Castle DE . It's right over the bridge . Those guys are great over there . 1800 373 1004 .

BTW where are you in SJ ? My shops in Swedesboro .

Offline GreenGA

  • Posts: 876
  • JR
Re: Looking for sheet goods supplier in southern New Jersey
« Reply #3 on: August 02, 2013, 10:39 PM »
Thanks,... That's the place I could not remember.

I use Russel Plywood out of New Castle DE . It's right over the bridge . Those guys are great over there . 1800 373 1004 .

BTW where are you in SJ ? My shops in Swedesboro .
Never use a 2x4, when a 2x6 will do just as well.

SYS-Lites, CMS/GE, TS55, KAPEX, MFT/3, CXS Kit, C15 Set, C12 Set, T18 Set, Ti15 Set, CT48 w/Boom Arm, Carvex PSBC, HL850, HL65L, RO90, RTS400, DTS400, LS130, DX93, RO150, ETS 150/3, RAS 115/4E, RS2E, Domino 500 & 700 Sets, MFK700 Set, OF1010 EQ, OF1400, OF2000E+, MFS700, FS3000/2, LR 32-SYS+97" rail, 2011 Centrotec Set, Metric and Imperial Zobo Forstner Bit Set, VS600 Dovetail System, Guide Rail Kit, Parallel Guides, Tradesman Cleaning Set, Shinex, lotsa 'tainers (Sys, Sorts, Minis, Midis, Maxis. Attics, Classic, New and Blue).
Coming Attractions: Workcenter, NAINA when available.

Offline Ripcurl

  • Posts: 9
Re: Looking for sheet goods supplier in southern New Jersey
« Reply #4 on: August 04, 2013, 07:48 PM »
Awesome thanks that's the place! I'm pretty sure at least haha, could not for the life of me remember I will check them out. 

I use Russel Plywood out of New Castle DE . It's right over the bridge . Those guys are great over there . 1800 373 1004 .

BTW where are you in SJ ? My shops in Swedesboro .

Nice man! I am currently in my garage in Cinnaminson slowly working on tooling up a bit...

Thanks again guys

Offline JerrySats

  • Posts: 154
Re: Looking for sheet goods supplier in southern New Jersey
« Reply #5 on: August 04, 2013, 08:49 PM »
Awesome thanks that's the place! I'm pretty sure at least haha, could not for the life of me remember I will check them out. 

I use Russel Plywood out of New Castle DE . It's right over the bridge . Those guys are great over there . 1800 373 1004 .

BTW where are you in SJ ? My shops in Swedesboro .

Nice man! I am currently in my garage in Cinnaminson slowly working on tooling up a bit...

Thanks again guys

Your not that far , if you need any hardwoods let me know . I stock a lot of curly maple and other hardwoods .

Offline Ripcurl

  • Posts: 9
Re: Looking for sheet goods supplier in southern New Jersey
« Reply #6 on: August 08, 2013, 12:03 AM »
Awesome man thanks for letting me know will do!  Same goes for you anything that I might be able to help out with just ask...

By the way went down to Russell Plywood and started an account, seems like exactly what I am looking for in terms of stable high quality green sheet goods, so thanks to everyone that replied makes a big difference to me, as well as my clients! 

Plus it just happens to be 5 min from Woodcraft...   [big grin]