Author Topic: I need a source for 14 inch 350mm full extension euro slides  (Read 6690 times)

0 Members and 1 Guest are viewing this topic.

Offline UncleJoe

  • Posts: 142
I am building a MFT/Sysport and I want to use full extension euro slides similar to the ones in the Guido Henn Chaos video. I would have thought this would be easy to find. Wow was I surprised, I can find the Blum ones but they are really expensive. I can find all sorts of low cost partial extension but I need 14" so I can open the systainer while on the drawer. It seams everyone is using ball bearing and I may have to do that but for a sysport it sure looks like the way Guido did his saves the most room and is a clean and simple way to do it.

Thanks for your help.
I am not young enough to know everything!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline bruegf

  • Posts: 796
  • Michigan
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #1 on: August 22, 2012, 02:45 PM »
I made my sysport deeper and then used low cost 3/4 extension slides.   The shelf pulls out far enough that the systainer opens fully and I use the extra space behind the systainer for storage of things I don't nee to get to often like extra boxes of sandpaper, etc.   Plus the extra depth made my 6' tall sysport more stable.

Fred
Fred

Offline UncleJoe

  • Posts: 142
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #2 on: August 22, 2012, 02:52 PM »
I was just thinking the same thing. I think the 16 inch partial extension will work I loose about 2.5 inches so I should be ok
I am not young enough to know everything!

Offline Michael_Swe

  • Posts: 362
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #3 on: August 22, 2012, 03:25 PM »

Offline Sparktrician

  • Posts: 3838
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #4 on: August 22, 2012, 03:42 PM »
I ordered mine from Rockler

 [smile]
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

ericbuggeln

  • Guest
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #5 on: August 22, 2012, 03:49 PM »
Gliderite, look on Amazon and Ebay for free shipping deals, Eric

Offline DKurzweil

  • Posts: 165
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #6 on: August 22, 2012, 04:28 PM »
Woodworkers hardware has some that I just used for a sysport, and they are priced right. 

I used the 15.75 inch full extension, the 13.75 will not be long enough for a t-loc to stay open.

Here's the link:  http://www.wwhardware.com/kv-tt100-economy-100-lb-full-extension-drawer-slide-kvtt100/

They are cheap in cost, but they are very sturdy and outperform my expectations.

Hope it helps,
Daniel
Addiction includes TS75, OF1010, Domino 500, RO150, T-18 set, CSX, LR-32 set, CT48 and CTMidi

Offline billg71

  • Posts: 167
    • Bill Graham Photography
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #7 on: August 26, 2012, 06:18 PM »
Try HGH Hardware Supply. They're really reasonable on pricing and carry most of the Blum line.

Don't know which slide you're referencing but it wouldn't hurt to give them a call.

HTH,
Bill
"Born to fish, forced to work..."

Offline Jeramy

  • Posts: 16
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #8 on: August 26, 2012, 06:45 PM »
For my sysport I used 14" Topslide Series 757 Over-Travel slides throughout.  Rockler item #29005.  They're working well for me, and are strong enough to support heavier equipment (I have a Tormek T-7 and accessories on one of the shelves).

Offline Tim Raleigh

  • Posts: 3560
    • Oakville Cabinetry
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #9 on: August 26, 2012, 08:31 PM »
Hafele has the 3/4 Extension 14"/350mm for 2.31 a pair.3/4" slides
Tim

Offline Eoghan Brown

  • Posts: 12
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #10 on: February 11, 2013, 09:44 AM »
I ended up buying a case of these. For my systport. worked very well.

Slides.
TS55, CT36, Rotex 90 & 150, LR32, OF1400, Domino 500, MFX700, MFT.
30 years residential construction, 25 years of residential deconstruction, Professional Fire Service.

Offline Wooden Skye

  • Posts: 1151
  • My little girl was called home 12-28-15
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #11 on: February 11, 2013, 06:35 PM »
GlideRite would be my recommendation.  You buy a 10 pack of 14" with 1" over travel for $33.  This is for 100lb rating.
Bryan

TS 55, (2) 1400 Guide Rails, 1900 Guide Rail, MFT/3, Domino DF 500, 2 domino systainers, ETS 150/3, RO 90, CT 26, (2) OF1400, RO 150. RTS 400, LR 32 set, PS300 jigsaw, 3 abrasive systainers, (2) sys toolbox, (2) sys mini, clamps and other accesories

Offline UncleJoe

  • Posts: 142
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #12 on: February 12, 2013, 06:53 AM »
GlideRite would be my recommendation.  You buy a 10 pack of 14" with 1" over travel for $33.  This is for 100lb rating.

That sounds like a great deal.Where can I find these at this price?
I am not young enough to know everything!

Offline Sal LiVecchi

  • Posts: 1377
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #13 on: February 12, 2013, 08:30 AM »
Glide Rite draw slides can be purchased directly from the company in factory 10 packs

Gliderite.com should get you there with no problems

Sal
Life is too short and the road is too long to drive anything less than a Festool

Offline UncleJoe

  • Posts: 142
Re: I need a source for 14 inch 350mm full extension euro slides
« Reply #14 on: February 12, 2013, 08:34 AM »
Thanks. Duh I searched for dealers instead of the company that actually makes the stuff. What a concept... Sell what you make directly to the customer.  [embarassed]
I am not young enough to know everything!