Author Topic: even MDF is getting a bit pricey?  (Read 3037 times)

0 Members and 1 Guest are viewing this topic.

Offline mrFinpgh

  • Posts: 488
even MDF is getting a bit pricey?
« on: March 15, 2021, 11:59 PM »
I just looked at buying some MDF for some laminate work I'm planning to do.  MDF seems to be working it's way up in price, alongside most other wood products.  So much for building a house out of cross laminated timber anytime in the near future :-)

For those more directly involved in the industry, is there any expectation that in the next year we'll see any kind of decrease in cost as supply increases?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline tjbnwi

  • Posts: 6443
  • No longer in Cedar Tucky Indiana
Re: even MDF is getting a bit pricey?
« Reply #1 on: March 16, 2021, 12:02 AM »
I’m not seeing any decreases, my suppliers are not indicating decrease are on the horizon. My estimates are good for 15 days now, my estimates used to be good for 45 days.

I just got 20 sheets of custom laid up 4x8x3/4 maple face one side, MDF exposed opposite side—-$160 a sheet.....


Online Alex

  • Posts: 7666
Re: even MDF is getting a bit pricey?
« Reply #2 on: March 16, 2021, 02:48 AM »
It never gets any cheaper. And with a global crisis like now, everybody raises their prices. When the crisis is gone, prices will remain.

Online rvieceli

  • Posts: 1521
Re: even MDF is getting a bit pricey?
« Reply #3 on: March 16, 2021, 06:32 AM »
 A couple of years ago I was routinely paying around $9 for 4x8 sheet of 7/16 OSB those same sheets are now over $32 per sheet.

23/32 Advantech subfloor is now over $53


Offline HarveyWildes

  • Posts: 977
Re: even MDF is getting a bit pricey?
« Reply #4 on: March 16, 2021, 09:20 AM »
In 2004 OSB was going for $6+ at Home Depot.  When I built my house in 2006-7 (housing bubble), it was running $13+.  Then it was back down to $6+ a couple of years later.  The price of construction lumber is related to construction activity which is high now due to COVID work flexibility and super-low interest rates.  I'm thinking that the price of construction will come back down as the economy starts to heat up post-COVID and interest rates go up, but I'm not the best at predicting the economy.

Offline squall_line

  • Posts: 776
Re: even MDF is getting a bit pricey?
« Reply #5 on: March 16, 2021, 09:55 AM »
I have a roof repair estimate from the insurance company written last September/October after a massive storm came through town.  I'm not sure the materials prices are anywhere close to accurate any more as we get into spring of this year, but at least the stock is available; our local big box stores have pallets upon pallets of OSB piled all over near the entrance and up and down just about every aisle, along with pallets of shingles.  Labor is almost impossible to come by, too.

Offline tofu

  • Posts: 23
Re: even MDF is getting a bit pricey?
« Reply #6 on: March 17, 2021, 11:52 AM »
Everything is up. I'm paying $120 a sheet for 17mm Baltic birch with footballs

Before the pandemic, I was paying $80

<<Modified - P. Halle - Moderator>>
« Last Edit: March 17, 2021, 12:34 PM by Peter Halle »

Online Alex

  • Posts: 7666
Re: even MDF is getting a bit pricey?
« Reply #7 on: March 17, 2021, 12:42 PM »
I was just at a local supplier for wood and general building supplies here in my city. He told me wood was going to be very scarce next month, because there was a global shortage, and quote: "The americans are buying everything, paying double the normal price".

Offline RustE

  • Posts: 605
Re: even MDF is getting a bit pricey?
« Reply #8 on: March 17, 2021, 01:06 PM »
Well, people certainly are paying double for a lot of things.

What I read a few days ago pointed at a few factors affecting wood prices:
- Reduced output from lumber mills in early 2020. Some were nonessential businesses and completely closed for a while.
- Transportation challenges. Truckers are busy moving what people are buying online. Fuel prices are climbing again.
- Low interest rates. Major renovations are more attractive with people spending more time at home.
- Shortage of homes for sale. There are people waiting for the pandemic to calm down before wanting to move.

So, no, I don’t expect wood prices to drop soon. Maybe during the last quarter of 2021 at the earliest.

Offline rst

  • Posts: 2693
Re: even MDF is getting a bit pricey?
« Reply #9 on: March 17, 2021, 03:27 PM »
When I negotiated to have my 30 x 36 pole building put up last February, I was quoted $24,000.  Steel roof, steel siding, one 42" commercial door opening, one 10' x 9' overhead door opening.  I immediately put $8000.00 down payment and contractor bought materials.  Borough would not approve my Amish contractor's drawings, so I had to dig out my drafting equipment and do some code checking to make acceptable plans to get approved.  In the interim, maybe a month and a half, contractor got busy and covid shutdown started.  Building went up in June/July.  Talked to him recently and was told building would have cost me $36,000 at current pricing.  I sheeted out some of the interior with 1/2" CDX, in the fall, paid around $28.00/ sheet...current box store price is $43.00, actually bought from local lumber yard/mill for $36.00.  Peruvian sanded ply, most beautiful CDX I've ever seen, no voids at all.  I 've been selling commercial steel entrances for 40 years.  The 42"x 84" door and frame I bought for my building would have normally cost me in the $650- $750 range...$1100.00 current price.