Author Topic: Edge Treatment Attachmey  (Read 1463 times)

0 Members and 1 Guest are viewing this topic.

Offline Birdhunter

  • Posts: 2646
  • Woodworker, Sportsman, Retired
Edge Treatment Attachmey
« on: January 25, 2019, 06:48 AM »
I am building two end tables out of beautiful quarter sawn white oak. I glued on 1/4” thick strips of brown ebony around the perimeter of both tables. The table tops are a little thicker than 3/4”.

I used the trick of roughing up the table’s edges, applying a 50/50 water glue solution to the edges, and then gluing on the brown ebony.

The ebony has stayed well attached for about a week, but I’m worried about long term in my client’s home.

I would think quarter sawn white oak will move almost not at all as will the brown ebony.

Worst case is one or more of the brown ebony strips could come loose. Is there a more forgiving glue than TB III?
Birdhunter

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline mrFinpgh

  • Posts: 316
Re: Edge Treatment Attachmey
« Reply #1 on: January 25, 2019, 01:45 PM »
I would still be a bit concerned about the total width of the top expanding and contracting.  It probably will be stable, but I think there is still going to be some movement.

I have seen some roycroft secretaries with 1/8" oak over the end grain, and it seems to still be hanging on, so there may be hope.