Author Topic: Drawer Slide Questions  (Read 369 times)

0 Members and 1 Guest are viewing this topic.

Offline Ross Davis

  • Posts: 22
Drawer Slide Questions
« on: May 20, 2020, 02:33 PM »
I've managed to read far too much about drawer slides that I've now in data overload mode.  [unsure] Thus a few questions:

1) When using side mount slides, what is the best position for the slides?  Top, bottom, middle, or wherever?

2) If using the 32 mm system will side mounts all be the same distance from the bottom of the drawer?  It seems they should be, but...

3) How do you go about attaching side mounts when using the 32mm system holes.  I've read some attach to the side first, then use a spacer below the drawer, then slowly pull out the drawer and then drive the screws. Others draw lines, etc.  What is your preferred method?

4) Is there an advantage to the undermount types which appear to wrap around to the sides of the drawer?

TIA

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline morts10n

  • Posts: 257
Re: Drawer Slide Questions
« Reply #1 on: May 20, 2020, 07:35 PM »
The undermount slides are the best slides for most cases. The slide does not wrap around the side of the drawer, it is not visible when the drawer is pulled out because of the fact that it is undermount. The least amt of width is list using undermount, but at the same time undermount slides eat up more height than side mount. If you have any other questions feel free to text me at 8053026057
Dave