Author Topic: Blum movento  (Read 19823 times)

0 Members and 1 Guest are viewing this topic.

Offline Deansocial

  • Posts: 2114
Blum movento
« on: August 22, 2011, 03:10 PM »
any one seen these new runners? look very good and look so easy to adjust

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline mastercabman

  • Posts: 1854
  • NORFOLK,VA
Re: Blum movento
« Reply #1 on: August 22, 2011, 03:50 PM »
Do you have a link?
I don't understand!?! I keep cutting it,and it's still too short!

Offline bobbobbob

  • Posts: 169
Re: Blum movento
« Reply #2 on: August 22, 2011, 03:52 PM »
Haven't seen them but found this article that had a pic:

http://woodworkingnetwork.com/Wood-Technology-at-Ligna-and-Interzum-2011/2011-07-06/Article.aspx?oid=1329555&aid=422

also a Blum Iceland press release (you can follow link to photos):
http://www.blum.com/is/en/04/02/releases/pre_1105_019.php
« Last Edit: August 22, 2011, 03:55 PM by bobbobbob »

Offline woodguy7

  • Posts: 2727
Re: Blum movento
« Reply #3 on: August 22, 2011, 04:56 PM »
Looks spendy.  Would be nice to see a video of this if anyone can find one.  JMB, challenge for ya  ;D
If its made of wood, i can make it smaller.
Shirt size medium
p.s- ive started reading these too

Offline jmbfestool

  • Posts: 6629
Re: Blum movento
« Reply #4 on: August 22, 2011, 05:49 PM »
Looks spendy.  Would be nice to see a video of this if anyone can find one.  JMB, challenge for ya  ;D

Im on it! lol!    [tongue]
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline Rene89

  • Posts: 79
Re: Blum movento
« Reply #5 on: August 25, 2011, 04:26 PM »
Darn can't find them on the internet... Even blum.com doesn't have them [sad]
Where did you see these new drawerslides?

rené
T 12+3, PS 300 EBQ, TS 55 EBQ, OF 1400 EBQ and guide rail adapter, 2x Festool guide rail 1400/2, Rotex 90, CTL 26E.

Coming up: Domino, EHL 65 E, Kapex 120.

-- http://juniorwoodshop.blogspot.com/ --

Offline Deansocial

  • Posts: 2114
Re: Blum movento
« Reply #6 on: August 25, 2011, 04:30 PM »
Darn can't find them on the internet... Even blum.com doesn't have them [sad]
Where did you see these new drawerslides?

rené
there is a link a few posts up to the blum.com press release

Offline jmbfestool

  • Posts: 6629
Re: Blum movento
« Reply #7 on: August 25, 2011, 04:53 PM »
I got an Email from Blum saying:

The MOVENTO range of runners for wooden drawers will not be available in the UK until 1st Quarter 2012. Currently we have no video's on the website, but I am sure they will be added shortly before the release of the product.
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline woodguy7

  • Posts: 2727
Re: Blum movento
« Reply #8 on: August 25, 2011, 06:10 PM »
Well JMB, thats a FAIL   [big grin]
If its made of wood, i can make it smaller.
Shirt size medium
p.s- ive started reading these too

Offline jmbfestool

  • Posts: 6629
Re: Blum movento
« Reply #9 on: August 26, 2011, 11:09 AM »
Well JMB, thats a FAIL   [big grin]

lol!  Well its better than NOTHING lol atleast we know they have not made a video lol!  and were are not going to get it for ages


JMB
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Offline Deansocial

  • Posts: 2114
Re: Blum movento
« Reply #10 on: October 28, 2011, 06:24 PM »


Offline jmbfestool

  • Posts: 6629
Re: Blum movento
« Reply #11 on: October 28, 2011, 06:53 PM »
Love them so much adjustment! Brilliant!!


Jmb
*********************************************************************** [thumbs up]UK members click me
*********************************************************************** [thumbs up]

Online Alex

  • Posts: 6261
Re: Blum movento
« Reply #12 on: October 28, 2011, 07:03 PM »
Brilliant perhaps, but now those slides will cost the client a ton because the carpenter doesn't know his job.  [scratch chin]

I'll just wait for the motorised version so I can just plug my laptop in the back and all the slides adjust automatically.
« Last Edit: October 28, 2011, 07:05 PM by Alex »

Offline Ken Nagrod

  • Restricted
  • Posts: 3438
Re: Blum movento
« Reply #13 on: October 28, 2011, 07:11 PM »
Brilliant perhaps, but now those slides will cost the client a ton because the carpenter doesn't know his job.  [scratch chin]

I'll just wait for the motorised version so I can just plug my laptop in the back and all the slides adjust automatically.

 [thumbs up]

Offline lordinteriors

  • Posts: 192
Re: Blum movento
« Reply #14 on: October 29, 2011, 03:55 AM »
i was fitting some blum servodrive lift systems and drawers in a showroom with our blum rep and he was telling me about the new movento drawerslides

lee
ts75, ro150, trion, of1400, ct22, cxs+centrotec set,of2200,ets 150 my modest collection in comparison

Offline Litch

  • Posts: 44
Re: Blum movento
« Reply #15 on: November 10, 2011, 08:01 AM »
They do look really good. Maybe I should hold off replacing all the drawers in my kitchen


Offline Samer

  • Posts: 73
  • www.ss-ltd.co.nz
    • www.DrSamer.co.nz
Re: Blum movento
« Reply #16 on: November 10, 2011, 08:34 AM »
Looks cool, but will be very expensive just got 4 pares of Blum tip-on runners $100 nz dollars each :(
Circular saw TS 55 R, Trimming PRECISIO CS 70, Miter saw KAPEX KS 120, Router OF 1010, Router 2200, MFS 700, DOMINO dowel jointer DF 500, Planer HL 850, sander ROTEX RO 150, CLEANTEX CTL 26, Mft3 Table,

Offline Litch

  • Posts: 44
Re: Blum movento
« Reply #17 on: November 14, 2011, 08:02 AM »
Hi all

Brochure out. They are for sale in Europe certainly Germany and Netherands. Here is a link to the brochure in English

www.blum.com/pdf/ep-184/en/ep-184_en.pdf

Cheers


Offline Phred

  • Posts: 93
Re: Blum movento
« Reply #18 on: April 29, 2013, 11:08 AM »
Tried to find these in the USA but according to Blum Customer Service they are not being offered.  Lee Valley is selling them but the prices look pretty high.

Fred

Offline Litch

  • Posts: 44
Re: Blum movento
« Reply #19 on: May 01, 2013, 10:02 AM »
They are out in Australia I have seen them and they do look pretty good. According to the Blum rep they were the best they have produced but he would say that. Certainly on Pricing in Oz they are only very slightly more (approx $2) than other older runners