Author Topic: Wooden Garage Door  (Read 5374 times)

0 Members and 1 Guest are viewing this topic.

Offline davee

  • Posts: 295
Wooden Garage Door
« on: June 24, 2013, 07:44 AM »
I have a friend with a wooden garage door that has failed.  It is made of multiple 2 foot by 9 foot panels joined together by a hinge. On one panel, the wood failed at the hinge.  He would like to have the failed panel and another replaced.  The wood is 1.5 inches thick with 1.75 and 4 inch wide sections.  Quarter inch plywood or glass is held in the sections.  The panel is painted and appears to be made of pine.  My question is what type of wood would you use for the replacement panel? 

thanks

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline NERemodeling

  • Posts: 608
    • New England Remodeling, LLC
Re: Wooden Garage Door
« Reply #1 on: June 24, 2013, 08:25 AM »
Is he trying to get this done cheap?    the door sections were probably made out of some sort of pine, and if painted and not in an area where it stays wet all the time then pine will work fine for many more years (how old is the original door)  you could jump up to cedar or redwood if you wanted more durability and longevity

If you go to an actual builders lumberyard you should be able to get #1 grade or very nice #2 2x6 lumber that if you pick through a bit you should be able to find boards knot free or almost knot free and very straight      this could be ripped to your 4" and 1.75" rails and stiles     i would guess that's your cheapest option

as another option, they should have or be able to get you 2x clear doug Fir   but the price will jump

the same lumberyard should have or be able to get you 2x cedar or redwood but now you will start to get into decent money and might want to consider replacing the door with a steel unit (if its not an aesthetic issue to ditch the wood door)

you might also give a few local garage door companys a call and see what it would cost to buy wood replacement sections

John
« Last Edit: June 26, 2013, 05:02 PM by NERemodeling »
CT26  -  (2) Midi  - Planex - Kapex -  Domino 500  -  Carvex  -  TS55EQ -  Rails; 800, 1080, 1400(holy rail), 1900, 3000 -  OF1400 - OF1010  - LR 32 - RO 150 - RO90 - RAS115 - ETS125 - DTS400 - LS130 -  EHL65 - HL850 -  MFT1080 - (2) MFT800

Offline davee

  • Posts: 295
Re: Wooden Garage Door
« Reply #2 on: June 26, 2013, 09:48 AM »
Thanks - the original door was installed in the 60's.  I don't think cheap is the essential item.  He is in his 80's and doesn't want a new door - just fix what he has.  I'm pretty sure the original is pine.

Offline tjbnwi

  • Posts: 6394
  • No longer in Cedar Tucky Indiana
Re: Wooden Garage Door
« Reply #3 on: June 26, 2013, 09:57 AM »
Clear vertical grain doug fir, most likely what they were originally made out of. 

http://www.bearcreeklumber.com/species/fir_cvg.html

Tom

Re: Wooden Garage Door
« Reply #4 on: June 26, 2013, 04:06 PM »
I would use vg doug fir for the rails and stiles, and mdo ply for the panel. Use a good oil based primer and 2 coats of quality paint.

If cost or time is a concern, he would be better off having a new steel door installed.

My  [2cents]

Mike
"The only lessons I've learned worth remembering, were when things weren't going well"

"Who is John Galt?"