Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Using CT-26E with other shop tools (Bosch Table saw, 6" jointer)  (Read 1116 times)

0 Members and 1 Guest are viewing this topic.

Offline jprassl

  • Posts: 1
Hi everyone. I am a hobbyist and have been using my CT-26E dust collector with a couple of other tools in my little shop. The CT and the tools both seem to work fine, and the CT is always plugged into a 20amp circuit running on 12/2 wire. So I have  two questions that I have not found answers for.

1. Am I doing harm running these tools (outlined below) through the CT?
2. Could I run a 220V tool through the CT? In this case a bandsaw.

Tools I am running through CT currently
- 10" Bosch 1400 Contractor Saw (specs say it pulls 15amp and 120V)
- 6" Grizzly Jointer (full load rating 15Amp, calls for 20amp circuit)

I would like to plug a Laguna 14Bx Bandsaw (110V) into the CT as well for dust collection. This unit calls for 15 amps. Here are the specs https://system.netsuite.com/core/media/media.nl?id=732630&c=860860&h=6df3e70c3e02098ab5da&_xt=.pdf

Thanks for the help and electrical guidance
Jay

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.