Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: SysPowerHub  (Read 3310 times)

0 Members and 1 Guest are viewing this topic.

Offline Jim M

  • Posts: 21
« on: November 27, 2016, 02:28 AM »
Are there plans to bring an American version of the Power Hub to the states?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline TylerC

  • Posts: 1084
Re: SysPowerHub
« Reply #1 on: November 27, 2016, 09:39 AM »
It's not on the docket for 2017.
This account is retired. Please address all Festool questions to @festool usa.

Offline Alec Buscemi

  • Posts: 36
Re: SysPowerHub
« Reply #2 on: November 27, 2016, 01:32 PM »
With a tanos sys 2 or Sys 3, a twelve gauge extension, some electrical boxes and 12 gauge wiring, and some bolting hardware (most of which you might have laying around your house), you can build your own much better one. Note the inlet plug for "power in" on my version.



Offline johninthecamper

  • Festool Dealer
  • *
  • Posts: 286
Re: SysPowerHub
« Reply #3 on: November 27, 2016, 03:11 PM »
Spider box in a sys would be neat,but you already get a ugly yellow one with the genny

Offline jdm5

  • Posts: 120
Re: SysPowerHub
« Reply #4 on: November 27, 2016, 03:39 PM »
@Alec Buscemi is your homegrown power hub actually grounded?  Don't take this as criticism, but using the Festool cord as the power input there is no electrical ground, but your outlets appear to be three pronged (hot, neutral, ground).

I'd recommend something like this which is grounded (doesn't have to be this one):

Hubbell 15a power inlet

Drank the green Kool-Aid...gave up counting long ago.