Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: RO 150 heat  (Read 2487 times)

0 Members and 1 Guest are viewing this topic.

Offline Bealorcarpentry

  • Posts: 2
RO 150 heat
« on: April 18, 2011, 08:49 AM »
Recently purchased a RO 150 and CT 26 package after hours of testing the tools at my supplier, and reading reviews here. I want to do a better job of dust control in clients' homes, and the Festool line seemed the best choice, in spite of the high initial investment. After a week, I am very impressed with the results. Excellent dust collection, clever engineering, and the sander is smooth and well balanced. However, it seems that the Rotex is heating excessively whenever used longer than 5 minutes or so. I notice this in both modes, with only moderate pressure (identical technique to what I'd use on my old Bosch with no noticeable heating). I am very satisfied with the tool's results and ease of use, but am concerned  long term: do the Rotex just "run hot", or should I be worried, especially long term. I realize it comes with an excellent warranty, but shipping out a tool, downtime for the tool, etc. still has a cost.
Thanks for any help,
     Mark Bealor

 

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8429
    • Festool USA
Re: RO 150 heat
« Reply #1 on: April 18, 2011, 08:53 AM »
Welcome to the forum!

Yes, it's normal and has been discussed here a few times. Our sanders have a break-in period during which the brushes are seated against the armature. This creates some heat. You should see this go away after 6-8 hours of use. Also, you'll see an increase in power once it's completely broken in.

We're also available by phone should you ever have questions.

We hope to hear more from you on the forum.

Shane Holland
Festool USA

Offline Bealorcarpentry

  • Posts: 2
Re: RO 150 heat
« Reply #2 on: April 19, 2011, 06:17 PM »
Thanks for the reply Shane.
Mark Bealor