Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: RO 150 FEQ Sander - pads  (Read 3790 times)

0 Members and 1 Guest are viewing this topic.

Offline bgp

  • Posts: 1
RO 150 FEQ Sander - pads
« on: January 16, 2014, 09:23 AM »
I am looking at spare sanding pads for the RO-150-FEQ. I ordered 496149 & 496160. the schematic in the manual says 493916. I could not find 493916 to order. have the part numbers changed? or did I order the wrong pads. The SN on my new sander is 40050270. I ordered through Amazon. Please let me know ASAP.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8429
    • Festool USA
Re: RO 150 FEQ Sander - pads
« Reply #1 on: January 16, 2014, 09:49 AM »
I am looking at spare sanding pads for the RO-150-FEQ. I ordered 496149 & 496160. the schematic in the manual says 493916. I could not find 493916 to order. have the part numbers changed? or did I order the wrong pads. The SN on my new sander is 40050270. I ordered through Amazon. Please let me know ASAP.

Welcome to the forum. Sorry for the bad information in the manual. That pad number was discontinued in 2011 and replaced with 496147, which is the correct replacement soft pad for the RO 150 FEQ. Item number 496149 is a hard pad which will also fit the RO 150. However, the pad you ordered, 496160, is a soft pad for the ETS 150. You need 496147 instead.

Shane

Offline neeleman

  • Posts: 1285
Re: RO 150 FEQ Sander - pads
« Reply #2 on: January 16, 2014, 10:14 AM »
Pad 493916 is an old type with 8 holes and is called:.
ST-STF D150/8 FX-W-HT is black where W=Weich=Soft and HT stands for Hochtemperatur=Heat resistant.

The newer ones do have 17 holes and are called Multistream for better dust control and sanding result.
496149 is blue and called ST-STF D150/17MJ-FX-H-HT where H=Hard
496160 is black and called ST-STF D150/17MJ-M8-W and is meant for the ETS150 with a M8 screw connection.
« Last Edit: January 16, 2014, 05:15 PM by neeleman »
Festoolian since 1998.
FESTOOL:
OF1010R | AGC18 | TPC18/4 | TID18 | OSC18 | RTSC400Li | CTL MIDI I | SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16