Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: RAS 115 PART  (Read 1586 times)

0 Members and 1 Guest are viewing this topic.

Offline ProCarpenterRVA

  • Posts: 150
RAS 115 PART
« on: September 03, 2021, 01:52 PM »
Yo where can I find the extension for this?

Thanks

Sent from my Pixel 3 XL using Tapatalk


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline guybo

  • Posts: 137
Re: RAS 115 PART
« Reply #1 on: September 03, 2021, 03:00 PM »
For the dust port? If so then this

Offline xedos

  • Posts: 491
Re: RAS 115 PART
« Reply #2 on: September 03, 2021, 04:20 PM »
I think he meant, how does one make the vacuum dingus longer.  [unsure]


Offline Alex

  • Posts: 7653
Re: RAS 115 PART
« Reply #3 on: September 03, 2021, 04:26 PM »
Something's not looking good with the vacuum dingus.

Also, OP should be a bit more specific.

Online Cheese

  • Posts: 8888
Re: RAS 115 PART
« Reply #4 on: September 03, 2021, 05:00 PM »
It looks ok to me, you've got the copper grounding strip in place however you're missing the serrations/grooves that help retain the vac hose.  [eek]

This is how it should look.


Offline Crazyraceguy

  • Posts: 685
Re: RAS 115 PART
« Reply #5 on: September 03, 2021, 05:53 PM »
Maybe he is thinking that there is an adapter/extension to make the port round?

What's up with the no ridges though? I have never seen that?
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75
Shaper Origin/Workstation

Offline ScotF

  • Posts: 2914
Re: RAS 115 PART
« Reply #6 on: September 04, 2021, 12:19 AM »
Looks like duct tape around the port.

Offline JD2720

  • Posts: 1229
Re: RAS 115 PART
« Reply #7 on: September 04, 2021, 07:13 AM »
Looks like duct tape around the port.

It also looks to me that something is wrapped around the port.
Maybe this is will work.

adapter for festool ras

Offline Crazyraceguy

  • Posts: 685
Re: RAS 115 PART
« Reply #8 on: September 04, 2021, 07:43 PM »
I have seen those, but never used one. That's the same guy who makes them to convert the OF1010 also. Looks good, but I haven't bothered to try either yet. After a while of stretching the hose fitting onto them, it gets much easier. Brand new hoses, not so friendly, but it does work.
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75
Shaper Origin/Workstation

Offline Alex

  • Posts: 7653
Re: RAS 115 PART
« Reply #9 on: September 05, 2021, 01:55 AM »
I never have a problem fitting a hose on the oval dust ports of the RAS, DX93 or PS2. When the hose, or better, the nozzle, is new it sticks on pretty well, but when a nozzle is older it drops off all the time.

Offline jimbo51

  • Posts: 526
Re: RAS 115 PART
« Reply #10 on: September 05, 2021, 07:00 AM »
 " ... when a nozzle is older it drops off all the time."

According to ads on television, there are a number of safe and effective treatments for this condition.