Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Festool CTL 26 E, Dust Extractor  (Read 767 times)

0 Members and 1 Guest are viewing this topic.

Offline euwood

  • Posts: 2
Festool CTL 26 E, Dust Extractor
« on: September 26, 2021, 04:19 PM »
Questions about Festool CTL 26 E vacuum cleaner (from Europe) ...

I chose Festool instead of Nilfisk and Starmix vacuum cleaners. I now have a Festool CTL 26 E, dust extractor and I would have a few questions. A big thank you in advance to all the respondents.

1. What kind of screws should I use if I want to screw the H-class filter onto the Festool CTL 26 E, vacuum cleaner? What kind of screws are right? Length, diameter and what kind of threads are loose or tight? (Of course, someone may want to screw on a regular filter, even if the basic fastening mechanism seems reliable and good.)

2. Festool CTL 26 E vacuum cleaner has a maximum power of 1200W and the Festool CTH 26 E, vacuum cleaner has a max power of 1000W. Does this mean that if you use a Class H filter in a Festool CTL 26 E, vacuum cleaner, then it should not be put in full power so it does not overheat or why the CTH model has a motor power of only 1000W?

3. Do I lose the Festool CTL 26 E warranty if I use a class H filter on it?

4. Have I correctly understood the efficiency of Festool vacuum cleaners main filters?

L / M -Class Filter is Epa 12 (Festool L and M class vacuum cleaners have the same filter)
E12 (Epa 12)> 99.5%

HEPA filter is Hepa 13
H13 (Hepa 13)> 99.95%> 99.75%

H-Class Filter is Hepa 14
H14 (Hepa 14)> 99.995%> 99.975%
« Last Edit: December 05, 2021, 09:32 AM by euwood »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Frank-Jan

  • Posts: 1260
  • Dutch Canadian living in Belgium
Re: Questions about Festool CTL 26 E vacuum cleaner
« Reply #1 on: September 26, 2021, 07:31 PM »
As for the first part of your question, the filter replacement is toolfree, so no screws are needed.

The 1000W vs the 1200W, I don't know, it might even be a typo in the specs, the cfm are rated the same.
I have an old spitt (starmix) vac that is 1600W, but has the same cfm, with a dustextractor that is tool actuated it is better to have lower power, so the total load on the socket that the combination vac/tool is plugged into doesn't become too high.