Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Planex not being effective with texture  (Read 3708 times)

0 Members and 1 Guest are viewing this topic.

Offline bclark

  • Posts: 1
Planex not being effective with texture
« on: June 18, 2018, 07:16 PM »
We are in the midst of remodeling some of our house and I thought it would be a good time to fix some of the terrible texture on the walls and ceilings and go with a more smooth, flat surface.

I have a rotex 90 and put some 80 grit granat on it to see how well it would chew through the 2 or 3 layers of latex into the knockdown on the walls.  It worked reasonably well with the first pass taking off all the paint on the high areas and flattening everything decently with a few subsequent passes (I do plan to skim coat so I'm not trying get it perfect).  I felt like the planex would be a good investment with the amount of area that I wanted to do this to.

I ordered a planex and some 80 grit granat and when I first tried it out it wasn't making much of an impact so I decided to get some 36 grit saphir.  That came in the other day and I'm still extremely underwhelmed by the performance.  It's so ineffective that I can sand an area at least 5x as fast with the rotex and even a hand sander with 60 grit seems to be faster.

There doesn't appear to be anything wrong with the planex itself.  I'm just applying light pressure and have it turned up to max speed.  Is there something I'm completely missing with this?  Should I just talk to festool?  I'm a little bummed because I would expect it to keep up with the rotex at the very least.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline harry_

  • Posts: 1333
Re: Planex not being effective with texture
« Reply #1 on: June 25, 2018, 09:36 PM »
While I have zero experience with the the Planex, the Rotex regardless of size, is an animal. Short of the RAS or a belt sander, do not expect anything the keep up with the material removal of a Rotex.

Disclaimer: This post is for educational and entertainment purposes only. Any resemblance to real persons, living or dead is purely coincidental. Void where prohibited. Some assembly required. Batteries not included. Contents may settle during shipment. Use only as directed. No other warranty expressed or implied. This is not an offer to sell securities. May be too intense for some viewers. No user-serviceable parts inside. Subject to change without notice. One size fits all (very poorly).

Offline rst

  • Posts: 2533
Re: Planex not being effective with texture
« Reply #2 on: June 26, 2018, 10:50 AM »
While it may seem counter intuitive, try turning your speed down on the Planex.

Offline Cen Cal Drywall

  • Posts: 2
Re: Planex not being effective with texture
« Reply #3 on: July 16, 2018, 03:34 PM »
Try using 24 granite, works very well with painted Texture. Then hit it with 220 grit and skim where needed.