Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Old LR32 vs new LR32 system - part numbers?  (Read 5878 times)

0 Members and 1 Guest are viewing this topic.

Offline fritter63

  • Retailer
  • *
  • Posts: 1432
Old LR32 vs new LR32 system - part numbers?
« on: March 01, 2011, 05:00 PM »
Is there a different part number for the old (1010 only) vs. new (1010 and 1400) LR32 hole drilling package?

I have a lead on a "used" (new but open) set and want to verify that it's the new one. Listed as part number 583291 (which is
also the new kit, but need to make sure the part numbers were changed)

Thanks.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8430
    • Festool USA
Re: Old LR32 vs new LR32 system - part numbers?
« Reply #1 on: March 01, 2011, 05:01 PM »
That is the current product number and compatible with the 1010 and 1400.

http://www.festoolusa.com/search.html?q=583291

Offline fritter63

  • Retailer
  • *
  • Posts: 1432
Re: Old LR32 vs new LR32 system - part numbers?
« Reply #2 on: March 01, 2011, 05:07 PM »
That is the current product number and compatible with the 1010 and 1400.

http://www.festoolusa.com/search.html?q=583291


So, can I imply a "yes" answer on the part numbers question (sorry, the software engineer in me is too specific about that stuff!)  [wink]

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8430
    • Festool USA
Re: Old LR32 vs new LR32 system - part numbers?
« Reply #3 on: March 01, 2011, 05:20 PM »
So, can I imply a "yes" answer on the part numbers question (sorry, the software engineer in me is too specific about that stuff!)  [wink]

Let me see if I can be more specific...  [poke]

Yes.  [wink]

The original part number, 489270, was obsoleted in July 2007. The product has not changed since then with the exception of the fact that it's now available in the T-Loc, 584100.

Offline Brice Burrell

  • Posts: 7388
Re: Old LR32 vs new LR32 system - part numbers?
« Reply #4 on: March 01, 2011, 06:41 PM »
Don't feel to bad Shane, I had to read his question a second time to understand why he wanted to confirm the answer.

Offline VictorL

  • Posts: 589
Re: Old LR32 vs new LR32 system - part numbers?
« Reply #5 on: March 01, 2011, 09:51 PM »
New plate and old plate are dimensionally identical. "New" plate has additional holes for OF-1400 router (see picture below on the right).

Regards,
VictorL
« Last Edit: March 01, 2011, 10:05 PM by VictorL »

Offline jonny round boy

  • Posts: 3227
Re: Old LR32 vs new LR32 system - part numbers?
« Reply #6 on: March 01, 2011, 09:55 PM »
New plate and old plate are identical. "New" plate has holes for OF-1400 router (on the right).

Regards,
VictorL

If one has holes that the other doesn't, how are they 'identical'?
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline ben_r_

  • Posts: 1329
Re: Old LR32 vs new LR32 system - part numbers?
« Reply #7 on: December 01, 2016, 01:46 PM »
Bumping this thread as the numbers changed again over the years. What is the difference between the older kit 583291 and the newer 584100 other than the obvious newer T-Loc Systainer?
If at first you don't succeed, redefine success!