Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Mini Systainer Insert  (Read 948 times)

0 Members and 1 Guest are viewing this topic.

Offline Rhino1789

  • Posts: 57
Mini Systainer Insert
« on: February 24, 2021, 08:37 AM »
I came across a great storage solution for Forstner bits in a mini systainer from a German YouTuber beard_and_wood where he add magnets to a mini systainer insert to secure the bits in the systainer.  My problem is that I’ve searched to the end of the internet (Amazon.de, ekat system, etc.) looking for this insert, but have come up empty.  Does anyone know where I can find this insert?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Bert Vanderveen

  • Posts: 896
Re: Mini Systainer Insert
« Reply #1 on: February 24, 2021, 09:52 AM »

I thought that TANOS might have that, but could not find it. Sorry.
Cheers, Bert Vanderveen

TS55 · TS55R · OF1010 · DF500 · MFT/3 + TSB1-MW 1000 + VL + CMS TS55 + CMS PS300 + LA-CS 70/CMS · CTL Midi · RTS400 · 2 x CXS Li 1,5 · T15+3 Li 4,2 · TI15 Impact Li 4,2 · Centrotec Sets 2008 + 2015 · PSB300 · LR32-SYS · RO150 · KS120 · 2 x MFK700 · RO90 · OFK700 · BS75 · OFK500 · OF2200 · CMS-GE · Vecturo 18 Li · TID 18 · TKS 80 EBS-Set · DTS 400 · ETS EC 125 w 150 pad · Surfix Set · CTL SYS · CT-VA-20 · … | Mirka 1230L P&C | Hammer: A3 31 Silent Power · N4400 · HS950 | TaigaTools: VacPods Pro Set
On order: … [ ! ]

Offline grobkuschelig

  • Posts: 735
Re: Mini Systainer Insert
« Reply #2 on: February 24, 2021, 05:12 PM »
As mentioned in the video this apparently was a special development for the shop „systemshop24“ .de or .com to your liking.

I remember seeing the option in their shop to configure your own set of forstners (Famag Bormax) including the systainers with optional magnets.

But I just checked and can not find the Systainer listed anymore.

Offline Rhino1789

  • Posts: 57
Re: Mini Systainer Insert
« Reply #3 on: February 24, 2021, 05:25 PM »
Thanks for your efforts gents!

Offline Don T

  • Posts: 2073
  • Phoenix, Az
Re: Mini Systainer Insert
« Reply #4 on: February 24, 2021, 08:23 PM »
You can use Kaizen foam. I have both imperial and metric Zobo’s in a mini.
« Last Edit: February 24, 2021, 09:14 PM by Don T »
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set

Offline Rhino1789

  • Posts: 57
Re: Mini Systainer Insert
« Reply #5 on: February 24, 2021, 08:34 PM »
I thought of that too, but was thinking it might be too tight (not enough foam between each bit). Would you mind sharing a photo? Thanks! I’ve been bitten by the mini systainer bug...