Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.
« previous next »
Pages: [1]   Go Down

Author Topic: MFS 400 ?  (Read 4695 times)

0 Members and 1 Guest are viewing this topic.

Offline Tom R

  • Posts: 28
MFS 400 ?
« on: December 31, 2010, 10:44 AM »
What is the smallest circle the MFS 400 can cut with a OF 1010 router?

Please advise,

Tom R

Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Tim Raleigh

  • Posts: 3615
    • Oakville Cabinetry
Re: MFS 400 ?
« Reply #1 on: December 31, 2010, 02:14 PM »
Accurately: with a 1/8" up or down spiral bit in the circle routing insert: 82mm or 3 3/16" diameter.
Not accurately: With a 5/16" template guide held next to the side of pivot guide with a 1/8" up or down spiral bit: 23mm or 7/8" diameter
Tim
Logged

Offline Tom R

  • Posts: 28
Re: MFS 400 ?
« Reply #2 on: December 31, 2010, 05:55 PM »
Thank you for the reply

I have to make several small circle cuts ranging from 72mmm - 94mm, accuracy counts. I am considering the MFS 400 or the circle gig from Micro fence. I believe the MFS
may be a more versital tool but the Micro Fence with the lift kit will be accurate and repeatible. I needed some input from someone who was familiar with the MFS 400

Thank you for the information

Tom R
Logged

Offline Dovetail65

  • Posts: 4616
    • Rose Farm Floor Medallions and Inlays
Re: MFS 400 ?
« Reply #3 on: December 31, 2010, 06:03 PM »
Microfence all the way, IMHO.
Logged
The one who says it can't be done should avoid interrupting the person doing it.

Offline JD2720

  • Posts: 1265
Re: MFS 400 ?
« Reply #4 on: December 31, 2010, 06:34 PM »
Quote from: nickao on December 31, 2010, 06:03 PM
Microfence all the way, IMHO.

I agree that the Micro Fence will work best for what you are wanting to do.
Logged

Offline neilc

  • Posts: 3152
Re: MFS 400 ?
« Reply #5 on: December 31, 2010, 06:36 PM »
I have both the MFS and Micro Fence.  For what you want to do, I think the Micro Fence is the better choice.

neil
Logged

Offline Tom R

  • Posts: 28
Re: MFS 400 ?
« Reply #6 on: December 31, 2010, 09:56 PM »
Mr Tim,
 I was leaning towards the Micro Fence, just need more info - Festool does not publish enough specs
on there tools, need user input.


Thanks,
Tom


Logged

Offline Tim Raleigh

  • Posts: 3615
    • Oakville Cabinetry
Re: MFS 400 ?
« Reply #7 on: January 01, 2011, 02:08 PM »
Tom:
As Brice Burrell recommends, if you are thinking of buying the 400 also buy the 700.
You will find you will use these things everywhere.
Tim
Logged

Offline HowardH

  • Posts: 1524
Re: MFS 400 ?
« Reply #8 on: January 08, 2011, 10:05 PM »
I love my 400!  I hardly ever use it for it's intended use - with the router.  It's a perfect oversized square and it also acts as big flag stop for making repetitive cuts on my MFT.  I simply butt it up against the fence and use a quick clamp to hold it in place where I want it.  I can think slide my stock under the rail and butt it up against the MFT and quickly make several identical parts.  Don't know what I would do without it.
Logged
Howard H
The Dallas Texas Festool Fanatic!

Mark Twain:  "I didn't attend the funeral, but I sent a letter approving of it." "If you tell the truth you don't have to remember anything."

P1cc, T15, TID-18, RO150FEQ, ETS EC 150, MT55cc, RTS400, CT22, CT36E, 800, 1080, 1400, 1400 holey, 1900 rails, OF1400, OF1010, CSX, C18, LR32, VacSys, Vecturo, Domino, Qwas dogs, Parf Dogs, Zobo's, Syslite Uni, CMS GE, PM 1500, Jet J/P, FS-WA, Shaper Origin. Felder AF-14, TSC 55 KEB, Dash-Board bench system
Pages: [1]   Go Up
« previous next »