Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Lr 32 drilling set 583290 vs drilling set in a systainer 584100  (Read 3207 times)

0 Members and 1 Guest are viewing this topic.

Offline woodvkk

  • Posts: 100
I'm trying to decide which to get since I just need the 20mm drilling right now and could build this out with less of an initial overlay and get a systainer and insert with the basic set ( and if I ever need hinges get the other bit ). I already have clamps.  However, what is included look as follows:

583290 : LR 32 Hole Drilling Set includes guide plate, centering mandrel, linear stops and two edge stops for drilling.

584100 : Includes: Guide plate, Centering mandrel, 2 edge stops, 2 linear stops, 2 clamps, Operating wrench, 35 mm carbide-tipped European hinge boring bit, 2 carbide-tipped 5 mm shelf pin bits (one for through holes and one for stopped pin holes)

So there is no mention of the operating wrench in the basic set and there is no part available separately. Can someone confirm whether the operating wrench is included in 583290?   

Much appreciated

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 12337
  • Remington Steele - My Third Boy
Re: Lr 32 drilling set 583290 vs drilling set in a systainer 584100
« Reply #1 on: October 12, 2016, 01:30 AM »
I do not see it included.  The wrench is a 5mm allen head - nothing special.

Peter

Offline woodvkk

  • Posts: 100
Re: Lr 32 drilling set 583290 vs drilling set in a systainer 584100
« Reply #2 on: October 12, 2016, 04:14 AM »
I do not see it included.  The wrench is a 5mm allen head - nothing special.

Peter

Thanks Peter

Offline TylerC

  • Posts: 1084
Re: Lr 32 drilling set 583290 vs drilling set in a systainer 584100
« Reply #3 on: October 12, 2016, 11:10 AM »
I just took a look at one to confirm, and the wrench is NOT included with 583290.
This account is retired. Please address all Festool questions to @festool usa.

Offline woodvkk

  • Posts: 100
Re: Lr 32 drilling set 583290 vs drilling set in a systainer 584100
« Reply #4 on: October 12, 2016, 05:24 PM »
I just took a look at one to confirm, and the wrench is NOT included with 583290.

Thanks!

Offline DashZero

  • Posts: 107
Re: Lr 32 drilling set 583290 vs drilling set in a systainer 584100
« Reply #5 on: March 22, 2019, 03:44 AM »
I was curious myself and was looking at getting the LR32 set and the other stuff separate except the clamps.


Offline grobkuschelig

  • Posts: 683
Re: Lr 32 drilling set 583290 vs drilling set in a systainer 584100
« Reply #6 on: March 22, 2019, 04:06 AM »
I did not get the Systainer, since it was cheaper to get the set and drill bits separately and fitting to application, for me.

Also, my OF1010 lives in a SYS-Combi, where I use the Drawer for most of the accessories...
And I much prefer the quick clamps to the screw type ones coming with the Systainer. :)

Offline JimH2

  • Posts: 1022
Re: Lr 32 drilling set 583290 vs drilling set in a systainer 584100
« Reply #7 on: March 22, 2019, 08:59 AM »
Regardless of what you end up with make sure that the read the supplemental manual and practice the procedure on some scraps (This is a good idea each time if you don't use it regularly). I ended up switched to a different product to eliminate some of the finagling.

Offline DashZero

  • Posts: 107
Re: Lr 32 drilling set 583290 vs drilling set in a systainer 584100
« Reply #8 on: March 22, 2019, 07:05 PM »
Regardless of what you end up with make sure that the read the supplemental manual and practice the procedure on some scraps (This is a good idea each time if you don't use it regularly). I ended up switched to a different product to eliminate some of the finagling.

I am wanting to build some closet shelves and drawers on the 32mm system.  What other alternatives are there besides the lr32?

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 12337
  • Remington Steele - My Third Boy
Re: Lr 32 drilling set 583290 vs drilling set in a systainer 584100
« Reply #9 on: March 22, 2019, 08:05 PM »
There are tons of alternatives out there on the market for doing shelf pin holes.  Each as advantages and disadvantages.  Some use a router and others a drill.  An internet search will offer you much information.

Peter