Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Sys Mini and Maxi inside measurements?  (Read 3149 times)

0 Members and 1 Guest are viewing this topic.

Offline Steve R

  • Posts: 919
Sys Mini and Maxi inside measurements?
« on: February 17, 2012, 11:12 AM »
Festool...or anyone,

I can't find the inside dimensions of the Mini and Maxi.... also what are the outside dimensions?

Is there one place that shows/tells all dimensions for all "tainers" I would like to know drawer sizes for the sortainers so I know what I can fit in them.

Cheers,
Steve
"A Festool is a tool, Marian; much better than any other tool: an axe, a shovel or anything. A Festool is still only as good or as bad as the man using it. Remember that.” ~ Ode to Shane (the movie)

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8430
    • Festool USA
Re: Sys Mini and Maxi inside measurements?
« Reply #1 on: February 17, 2012, 01:06 PM »
Steve,

Hopefully someone can help you. I'm not in the office today and will be traveling all of next week. So I don't have access to these to measure them. Sorry.

Shane

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 9962
  • Finger Lakes Region, NY State , USA
Re: Sys Mini and Maxi inside measurements?
« Reply #2 on: February 17, 2012, 04:01 PM »
For Classics and Sortainer drawers  ...........    

    Classic



Sortainers

Sortainer dimensions are at bottom of first post.


I don't have a Maxi (believe it or not) but the outside is approx. H 157mm, W596mm, D396mm from catalog.

Mini - I  exterior approx H70mm, W268mm, D171mm  from catalog.

To see more pics of what types of things will go into the Sortainer drawers see  here

Seth
« Last Edit: February 17, 2012, 04:03 PM by SRSemenza »

Offline Corwin

  • Posts: 2646
Re: Sys Mini and Maxi inside measurements?
« Reply #3 on: February 17, 2012, 05:54 PM »
My metric tape measure and my Mini II or at my other house, but I do have a Mini I and an imperial tape here....    [smile]

The inside width is about 10-1/4", but only 9-3/4" between the rear latches.
The inside depth (front to back) is about 6-7/16" except at the front latches where it is only 6-3/16" deep.
The inside height of the bottom portion is about 1-15/16" and the lid only adds another 1/8" around the the handle recess, and about 1/2" in the other portions of the lid.

Offline Tom Gensmer

  • Posts: 798
  • Residential Remodeler in Minnesota
Re: Sys Mini and Maxi inside measurements?
« Reply #4 on: February 18, 2012, 12:01 AM »
Hi Steve! I got your voice mail today, I apologize I didn't get back to you!

I believe you were interested in Maxi Systainers, here are some pics of what I store in mine.

Let's get together again soon!

Best,
Tom
CT-MIDI, C-18, RO-150, RO-90, OF-1010, OF-1400, MFK-700, MFK-700EQ/B, EHL-65, DTS-400, LS-130, MFT/3 (x4), MFT/Kapex (x3), KA 65 Conturo, endless Systainers

Offline Tom Gensmer

  • Posts: 798
  • Residential Remodeler in Minnesota
Re: Sys Mini and Maxi inside measurements?
« Reply #5 on: February 18, 2012, 10:02 AM »
Festool...or anyone,

I can't find the inside dimensions of the Mini and Maxi.... also what are the outside dimensions?

Is there one place that shows/tells all dimensions for all "tainers" I would like to know drawer sizes for the sortainers so I know what I can fit in them.

Cheers,
Steve

Steve, regarding the Sortainers, I believe that Timothy stocks a Sortainer 4 at our Woodcraft in Bloomington. In the past they have allowed me to bring in small tools to see what fits in various Systainers. If worse comes to worse I suppose you can always walk in with a notebook and tape measure and measure them?.... Have a great weekend buddy!
Best,
Tom
CT-MIDI, C-18, RO-150, RO-90, OF-1010, OF-1400, MFK-700, MFK-700EQ/B, EHL-65, DTS-400, LS-130, MFT/3 (x4), MFT/Kapex (x3), KA 65 Conturo, endless Systainers