Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Kapex Question  (Read 664 times)

0 Members and 1 Guest are viewing this topic.

Offline Jim E.

  • Posts: 5
Kapex Question
« on: February 08, 2020, 11:57 AM »
I recently purchased a KS 120 EB.  As I adjust the bevel angle, can I expect to feel a detent for 0 degrees?  When I turn my bevel adjustment knob, I’m not feeling any detent as I pass through 0 degrees - and I thought I read somewhere that there is a detent, though I don't see it mentioned in either the owner's manual, or the supplemental manual.  Of course, I can adjust the bevel range selector to go from 0 to 45, and it will stop at 0, but if I have the range selector going from -45 to 45, for example, I don’t feel any detent going through 0 degrees. 

And if there is a detent for 0 degrees on the bevel angle, is this something I can fix myself - or does the saw need a warranty repair?  Purchased Dec '19.

Thanks.

Jim

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Knight Woodworks

  • Posts: 259
Re: Kapex Question
« Reply #1 on: February 08, 2020, 12:57 PM »
There is no bevel detent at 0 or 45. Would be nice if there was.

John

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 12367
  • Remington Steele - My Third Boy
Re: Kapex Question
« Reply #2 on: February 08, 2020, 03:33 PM »
There are hard stops.

Peter