Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Centrotec Installers Set Replacement Pieces  (Read 4220 times)

0 Members and 1 Guest are viewing this topic.

Offline Chance B

  • Posts: 51
Centrotec Installers Set Replacement Pieces
« on: September 12, 2016, 06:32 PM »
Fairly new to Festool here. My main question is this... Is everything in the Installers Set for sale individually in the event pieces are lost or worn out?

Thanks,
Chance

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline TylerC

  • Posts: 1078
Re: Centrotec Installers Set Replacement Pieces
« Reply #1 on: September 13, 2016, 08:57 AM »
Most of the pieces are available separately, but not everything. Specifically, the square drives are not available individually.
This account is retired. Please address all Festool questions to @festool usa.

Offline sroxberg

  • Posts: 154
Re: Centrotec Installers Set Replacement Pieces
« Reply #2 on: September 13, 2016, 09:02 AM »
Interesting information on the Square Drive bits. I just bought the set and it hasn't even arrived yet but those bits were one of the reasons.

If I did want to purchase other Square Drives are they available from a third party?

Another question since I haven't received my set yet, what other items should I add to it? I just purchased my first Festool drill and so I don't have any Festool accessories for it yet.

Offline Mort

  • Posts: 355
  • World's Tallest Midget
Re: Centrotec Installers Set Replacement Pieces
« Reply #3 on: September 13, 2016, 09:25 AM »
Snappy has the square drive bits. I'd give a link but my internet is being slow and stupid.
I hate signatures.

Offline six-point socket II

  • Posts: 1608
  • formerly @the_black_tie_diyer - 22/02/21 inactive.
Kind regards,
Oliver

"... . Say yes to stuff, and it will take you interesting places." - Anne Richards, CEO Fidelity International

Offline Cheese

  • Posts: 10172
Re: Centrotec Installers Set Replacement Pieces
« Reply #5 on: September 13, 2016, 10:33 AM »
I've used Apex bits for the last 15 years, now it's strictly Apex and Festool bits.

I've tried Dewalt, I've tried Milwaukee, I've tried the no-name version at 10 cents each, they're all trash. The bit gets buggered and that, then buggers the screw.  [mad]

Apex makes the square recess bit in 5 different lengths.

http://products.apex-tools.com/tools/bits/square-recess

http://products.apex-tools.com/tools/bits

Offline JimS_1984

  • Posts: 27
Re: Centrotec Installers Set Replacement Pieces
« Reply #6 on: September 13, 2016, 03:06 PM »
Do you mean replacement for the Imperial version of the Centrotec Installer Set? 

That includes wonderful brad-point drill bits 1/8", 1/4"....1/2".  I haven't found replacements for these.  Festool used to offer the Imperial Centrotec Wood Bits Set 496942, which I presume were the same, but that set dissappeared in 2014.  And I don't think the individual drill bits, say 1/2" centrotec, have ever been offered singly.  I hope I'm wrong...

Snappy offers Centrotec imperial options for 1/4" and smaller.  Nice for pilot holes.
TS55, DF500, OF1010, Carvex, Vecturo, C15, CXS, ETC EC 125, RO90, CT 26

Offline Chance B

  • Posts: 51
Re: Centrotec Installers Set Replacement Pieces
« Reply #7 on: September 13, 2016, 03:35 PM »
JimSpence,

Kind of... I believe the imperial brad point drill bits would be what I replace the most. That is at least what I replace the most out of my current Dewalt/Irwin sets. My main concern is, I am spending $300 for a set that I may or may not be able to buy replacement pieces to continue and have a FULL set after pieces are lost or worn.

If I need a 3/8" brad point bit because some knucklehead misplaced it, I would like to order only that piece.

Offline Chris Wong

  • Festool Dealer
  • *
  • Posts: 1029
  • I make things that challenge me.
    • Flair Woodworks
Re: Centrotec Installers Set Replacement Pieces
« Reply #8 on: September 14, 2016, 04:46 PM »
The bits do have part numbers, and are listed as replacement parts. Part number for the 3/8" is 478317.
Chris Wong, http://FlairWoodworks.com and https://www.ultimatetools.ca/
First Festool was a free pencil.
Shipping live-edge cribbage boards around the world since 2010.