Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Flip stops for KA-UG extensions  (Read 2865 times)

0 Members and 1 Guest are viewing this topic.

Offline broseiden

  • Posts: 59
Flip stops for KA-UG extensions
« on: December 27, 2014, 01:09 PM »
Are the flip stops available for purchase independently of the extensions? I tried searching in EKAT, but maybe I'm not using it properly.

Thanks! - MIKE

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline SMJoinery

  • Posts: 530
Re: Flip stops for KA-UG extensions
« Reply #1 on: December 27, 2014, 01:24 PM »
Hi Mike

I'm fairly sure part number is 488560.
Regards
Scott

Offline GarryMartin

  • Posts: 1880
Re: Flip stops for KA-UG extensions
« Reply #2 on: December 27, 2014, 01:40 PM »
I'm fairly sure part number is 488560.

That's for the older discontinued extension set. AFAIK, the "Stop Flag" on the KA-UG arms is not available as a single part number.

Offline Tom Bellemare

  • Inactive Member
  • *
  • Posts: 5148
  • Festool demo's & personal service in Central Texas
Re: Flip stops for KA-UG extensions
« Reply #3 on: December 27, 2014, 01:54 PM »
The MFT Flag Stops work fine. The only difference is the actual flag. You can modify the long side or just use the short side.


Tom

Offline Don T

  • Posts: 2042
  • Phoenix, Az
Re: Flip stops for KA-UG extensions
« Reply #4 on: December 27, 2014, 02:49 PM »
I am using the MFT flag stops
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set

Online neeleman

  • Posts: 1273
Re: Flip stops for KA-UG extensions
« Reply #5 on: December 27, 2014, 02:54 PM »
Not sold as one part but only the replacement parts according the EKAT.
From #497207 or 497221 you need parts: 2, 5, 9, 10, 11, 12, 13 and 15.
Festoolian since 1998.
FESTOOL:
RTSC400Li | CTL MIDI I | SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline tjbnwi

  • Posts: 6394
  • No longer in Cedar Tucky Indiana
Re: Flip stops for KA-UG extensions
« Reply #6 on: December 27, 2014, 11:10 PM »
As Tom said you can use either flag stop. When I flip the stops down I leave it up off the surface. Nothing will screw up a setting faster than sawdust between the work piece and the stop. Take a look at the farthest stop in the picture, you will see the long arm is towards the UG support surface.

Tom

Offline broseiden

  • Posts: 59
Re: Flip stops for KA-UG extensions
« Reply #7 on: December 28, 2014, 02:38 PM »
Thanks everyone -- ended up buying a total of 5 to use between my MFT and Kapex :)

Plus the included ones, that is :D