Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Festool Recon Topic (compiled)  (Read 174785 times)

0 Members and 1 Guest are viewing this topic.

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #690 on: August 13, 2021, 10:22 AM »
Dust Extractor CLEANTEC CT 36 E HEPA just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #691 on: August 13, 2021, 01:01 PM »
RTSC 400 Cordless Orbital Sander is up again.

Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #692 on: August 14, 2021, 09:38 AM »
Suction-Based Clamping Pump VAC-PMP has returned to the front of the queue.

Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #693 on: August 14, 2021, 12:32 PM »
Cordless Angle Grinder AGC 18-115 Li 5,2 EBI-Plus is posted

Offline guybo

  • Posts: 332
Re: Festool Recon Topic (compiled)
« Reply #694 on: August 17, 2021, 09:25 PM »
new items added

Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #695 on: August 17, 2021, 11:46 PM »
CT 48 E Dust Extractor is posted; came up some time this evening.???

Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #696 on: August 18, 2021, 11:34 PM »
Conturo KA 65 Portable Edge Bander is up as of sometime this evening.  CT48 was moved to the back of the line.

Conturo KA 65 Portable Edge Bander is posted

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #697 on: August 20, 2021, 09:49 AM »
OS 400 E-Plus Vecturo Oscillating Multitool is up.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #698 on: August 23, 2021, 07:49 AM »
Cordless Drill TXS Li 2.6 Set has been posted.

More items up today as well.

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #699 on: August 23, 2021, 08:39 AM »
OF 1400 EQ Imp. Plunge Router just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #700 on: August 23, 2021, 08:48 AM »
CXS Compact Cordless Drill Set just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #701 on: August 23, 2021, 08:49 AM »
Rotex RO 90 DX Multi-Mode Sander just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #702 on: August 23, 2021, 09:04 AM »
Cordless Drill TXS LI2.6 Plus just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline Yardbird

  • Posts: 315
Re: Festool Recon Topic (compiled)
« Reply #703 on: August 23, 2021, 09:49 AM »
Rotex RO 90 DX Multi-Mode Sander just posted.

I bought one of these then saw it is an old model #.  This is 571823 and new is 576263.  I searched the internet, but could not find out the difference.  I am assuming this is just a systainer update?  Hate to think I bought old version of something that had a radical update like the Planex, but systainer not a problem.  Thanks to anyone who can shed some light on differences.

Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #704 on: August 23, 2021, 10:12 AM »
Rotex RO 90 DX Multi-Mode Sander just posted.

I bought one of these then saw it is an old model #.  This is 571823 and new is 576263.  I searched the internet, but could not find out the difference.  I am assuming this is just a systainer update?  Hate to think I bought old version of something that had a radical update like the Planex, but systainer not a problem.  Thanks to anyone who can shed some light on differences.

There have been no updates, radical or otherwise, to the RO90 itself in at least the last 5 years since I purchased mine.  Some may consider the Sys3 a "radical" change, but that's just the box it sits in.  To wit, EKAT only shows one tool number for the RO90, 496427, indicating that there have been no changes since it was launched.

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #705 on: August 23, 2021, 10:29 AM »
HK 55 EQ-F-Plus imperial just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline Yardbird

  • Posts: 315
Re: Festool Recon Topic (compiled)
« Reply #706 on: August 23, 2021, 11:50 AM »
Rotex RO 90 DX Multi-Mode Sander just posted.

I bought one of these then saw it is an old model #.  This is 571823 and new is 576263.  I searched the internet, but could not find out the difference.  I am assuming this is just a systainer update?  Hate to think I bought old version of something that had a radical update like the Planex, but systainer not a problem.  Thanks to anyone who can shed some light on differences.


There have been no updates, radical or otherwise, to the RO90 itself in at least the last 5 years since I purchased mine.  Some may consider the Sys3 a "radical" change, but that's just the box it sits in.  To wit, EKAT only shows one tool number for the RO90, 496427, indicating that there have been no changes since it was launched.


Thanks, Squall_line.   I bought a few items earlier this year on Recon, and knew enough to keep the current model # written down so I would not get the older version.  I have seen older models, such as Mini and Midi pre-Bluetooth models on Recon and wanted to avoid that problem. This RO90 popped up too quick for me to research so glad only difference is the systainer. 

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #707 on: August 23, 2021, 12:19 PM »
TS 55 REQ-PLUS Tracksaw Metric just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #708 on: August 23, 2021, 12:34 PM »
Planex (LHS 225) Drywall Sander & CT 36 AC Dust Collector just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #709 on: August 23, 2021, 12:40 PM »
CT 48 E Dust Extractor just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline DeformedTree

  • Posts: 1398
Re: Festool Recon Topic (compiled)
« Reply #710 on: August 23, 2021, 10:53 PM »
TS 55 REQ-PLUS Tracksaw Metric just posted.

I have to wonder if it was an original one.  It would be like 5+ years old at this point.  Again I wonder if sometimes they do a conversion on some to help the variety/etc.

Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #711 on: August 24, 2021, 07:23 AM »
TS 55 REQ-PLUS Tracksaw Metric just posted.

I have to wonder if it was an original one.  It would be like 5+ years old at this point.  Again I wonder if sometimes they do a conversion on some to help the variety/etc.

I found that curious as well.

Also, it's likely truly an original, not a swap.  It's either a NOS that was sold and returned in the 30-day window, warrantied out in the 3-year window, or it was sent back for repair and deemed too costly by the owner and given up for parts.

Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #712 on: August 24, 2021, 07:24 AM »
LS 130 EQ Linear Detail Sander has been posted.  33 other pieces are queued up as well, with the end-of-day blocker after the first 11 or so.

Again,

LS 130 EQ Linear Detail Sander has been posted.

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #713 on: August 24, 2021, 09:00 AM »
CT MIDI HEPA Dust Extractor is up.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #714 on: August 24, 2021, 09:04 AM »
CT MIDI HEPA Dust Extractor is up.

Note: this is the old, non-BlueTooth model, with the dials.  The MIDI-I is later on in the list.

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #715 on: August 24, 2021, 10:59 AM »
Cordless Track Saw TSC 55 Li REB-F-Basic just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #716 on: August 24, 2021, 11:13 AM »
Router OF 2200 EB-F-Plus just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline squall_line

  • Posts: 1385
Re: Festool Recon Topic (compiled)
« Reply #717 on: August 24, 2021, 11:25 AM »
PS 420 EBQ-Plus Jigsaw is up.

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #718 on: August 24, 2021, 11:29 AM »
Multi-Mode Sander ROTEX RO 125 FEQ-Plus just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline GoingMyWay

  • Posts: 1697
Re: Festool Recon Topic (compiled)
« Reply #719 on: August 24, 2021, 12:04 PM »
Carvex PSB 420 EBQ Jigsaw just posted.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS