Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Festool D8 Connectors vs. Rafix System  (Read 667 times)

0 Members and 1 Guest are viewing this topic.

Offline pdlandgang

  • Posts: 59
Festool D8 Connectors vs. Rafix System
« on: January 26, 2020, 05:39 PM »
I have approx. 15-20 master closets to build over the next few months.  They need to be built to flat-pack in order to get to the job site and installed.  I have the domino already and it appears that the drilling jigs are basically the same cost.  Is there any advantage of the Festool connectors themselves?  The Festool connectors are about 2.5x more expensive per piece.

The one thing that seems to stand out to me is that the Festool product does allow for some adjustment if there is a variance in the drilling, as opposed to the Rafix system doesn't lend itself to any tolerance.

Any insights, particularly with those might have used both, is greatly appreciated.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Birdhunter

  • Posts: 3411
  • Woodworker, Sportsman, Retired
Re: Festool D8 Connectors vs. Rafix System
« Reply #1 on: January 26, 2020, 06:00 PM »
I’ve used the Festool connectors for both the 700 and the 500.

Both connector systems are excellent in terms of holding power.

I don’t see any room for adjustment in either system. Extreme precision in placing the mortises is required.

The Domino loose tenon system, of course, does allow for adjustment if a tight/loose approach is used.

I have zero knowledge of the Rafix system.
Birdhunter