Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Edge Joining with domino  (Read 961 times)

0 Members and 1 Guest are viewing this topic.

Offline goodwood

  • Posts: 1
Edge Joining with domino
« on: January 25, 2020, 11:34 PM »
Has there been any study regarding deflection on edge joined boards?  When designing a shelf unit recently I was using sagulator to project the amount of sag that would occur with 1 inch thick shelves 36 inches long by 11 1/4 wide. The wood is african mahogany.  The shelf will be supported by medal paddle supports  - 2 on each end and ??? across the back (that's what I was trying to determine).  Sagulator does not address that but does anticipate using a lip.  Based on sagulator the expected weight should be supported adequately but what if I am wrong about the weight to be supported?  So then I got thinking about the fact that I typically make shelves out of three pieces edge joined together using dominos.  Would that not make the shelf piece more rigid and less likely to sag than a shelf made of one piece of wood the same size?   Does anyone know of any fact based guidelines for this?

Thanks in advance

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline tjbnwi

  • Posts: 6437
  • No longer in Cedar Tucky Indiana
Re: Edge Joining with domino
« Reply #1 on: January 26, 2020, 12:05 AM »
I do not think the edge joining has any affect in this scenario. You have not increased the thickness of the material.

Tom

Offline ChuckS

  • Posts: 2882
Re: Edge Joining with domino
« Reply #2 on: January 26, 2020, 12:28 AM »
Not sure if this American Woodworker article is helpful to you: https://www.popularwoodworking.com/projects/aw-extra-3614-stronger-shelves/

There is nothing that can provide more rigidity to a shelving than a vertical support in the middle. One way to hide the centre support, in the case of a bookcase, is to glue a bookspine to the front edge of the support so the support looks like a book on the shelf (the support is trimmed narrower to accommodate the spine). In the credenza shown below, the dadoed centre support is hidden behind the sliding doors.
« Last Edit: January 26, 2020, 12:47 AM by ChuckM »