Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Domnio XL - problems with uneven results  (Read 1156 times)

0 Members and 1 Guest are viewing this topic.

Offline therealbyrnesie

  • Posts: 1
Domnio XL - problems with uneven results
« on: October 12, 2018, 11:50 AM »
I've had my Domino XL for less than a year and over the last few months I've started to notice that after use, the mortises end up being slightly off vertically, which causes my joint to be offset by 1/16 or more. I highly doubt it my technique. Is it possible the mechanism that holds the bit in place has become bent?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Online Birdhunter

  • Posts: 3356
  • Woodworker, Sportsman, Retired
Re: Domnio XL - problems with uneven results
« Reply #1 on: October 12, 2018, 02:09 PM »
Without seeing the unit, my first guess would be the fence isn’t tight. Do the tenons all line up or are some higher than others?