Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: domino 500  (Read 1039 times)

0 Members and 1 Guest are viewing this topic.

Offline Jem

  • Posts: 3
domino 500
« on: March 05, 2019, 06:54 AM »
I bought the 500 Q plus and not the Q set.  Does the Q set have alignment pins and the Q plus have tabs? I thought these were the same machine minus some attachments.   
I want one with the pins for registration in a previously cut slot and the tabs don't do this.  If these are different machines can I exchange and upgrade to the Q plus? 

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 12133
  • Magnum - My new little boy
Re: domino 500
« Reply #1 on: March 05, 2019, 07:20 AM »
Welcome to the Forum!

The pin type Domino was the original model.  It was replaced with the paddle style.


Offline Jem

  • Posts: 3
Re: domino 500
« Reply #2 on: March 05, 2019, 07:51 AM »
Thank you!

Offline RKA

  • Posts: 1865
Re: domino 500
« Reply #3 on: March 05, 2019, 11:33 AM »
The cross stops might be useful to you (if you didn't already get them).  They have a pin on them and they attach to the outside edges of the domino base. But obviously, the spacing will be far wider than the built in paddle stops on the domino base.