Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: CTL SYS and RO 90  (Read 1372 times)

0 Members and 1 Guest are viewing this topic.

Offline Przemian

  • Posts: 1
CTL SYS and RO 90
« on: February 24, 2019, 06:12 PM »
Hello,

I own Ro 90 sander and I need to find a good vacuum for it. I decided that CTL SYS should be good enough for what I use my sander for: refinishing stairs and prep for stain, sanding down doors, trim and baseboards. I wont use it for drywall repair, my other setup does that sufficiently enough. My question is: is this vacuum going to catch what RO 90 with 220 and 240 will produce? Is this considered  "fine dust"? Long life filter bag (500642) specifies "not recommended for fine dust". Also canadian website shows main filter (500558) for $35.50 (1 micron) as the only option whereas usa site shows also HEPA filter (200340) for $69US (0.3 micron). Which one am I getting with the vac purchase and is it enough for unspecified "fine dust"?
Please shed some light on this.

With regards,
Prem

« Last Edit: February 24, 2019, 06:16 PM by Przemian »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Mr Speaker

  • Posts: 28
Re: CTL SYS and RO 90
« Reply #1 on: February 19, 2022, 02:53 PM »
All, well most, sanders like it when you turn down the vacuum a little. The CTL SYS cannot do that. Also the RO90 removes a lot and the bag capacity of the CTL-SYS is much smaller than the CTL MINI/MIDI. I first bought a CTL SYS but had it on a trolley all the time, and upgraded to the CTL MIDI. But the CTL SYS will work. for maximum portability also take a look at the new CTLC SYS.