Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: CT Sys Dust Collector  (Read 1918 times)

0 Members and 1 Guest are viewing this topic.

Offline TheTabletopSpot

  • Posts: 2
CT Sys Dust Collector
« on: March 22, 2019, 08:24 AM »
I just bought the Sys-Roll and a number of systainers, wish I had don't that 20 years ago.  Anyhow, I'm looking at the CT-Sys extractor to add to the collection and there's something I'm not getting with the on board outlet.

I read, in a review of the CT-SYS that the on is rated for 3.7 amps.  This doesn't seem right.  Is that rating correct or am I misunderstanding how this works?  That doesn't seem enough to run much.

For reference : Click Me

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8430
    • Festool USA
Re: CT Sys Dust Collector
« Reply #1 on: March 22, 2019, 10:47 AM »
You may have found that the integrated receptacle that provides energy for tool-triggered activation on the CT has a warning label on its dust cover.  This warning reads, “To reduce the risk of fire, only connect a tool rated 3.7 amp. maximum to this receptacle”.  What does this mean in regards to the tools you can use with a Festool CT Dust Extractor?  It means that CT Dust Extractors are designed to work with ALL Festool power tools.  However, we cannot speak for, or verify the compatibility of other non-Festool products used in conjunction with the Festool CT Dust Extractors.  Furthermore, you may find that it is advantageous to use another circuit to energize a power tool separate of that being used by the CT Dust Extractor to ensure that the maximum current* is available for the application.

To put it more simply, Festool CT Dust Extractors are designed to be used with every Festool product in normal working environments.

*The quality of your energy supply (voltage & current) may vary.

Offline George Oliver

  • Posts: 43
Re: CT Sys Dust Collector
« Reply #2 on: March 23, 2019, 08:25 PM »
You made me curious so I checked my ct sys manual. On page 10 there's a technical spec and it says "maximum appliance socket connected load: 12A" and the vac's power consumption is 8.3A so that's where the 3.7 figure must come from. It does seem a little odd.