Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: 500672 Hose connector  (Read 833 times)

0 Members and 1 Guest are viewing this topic.

Offline hemlock

  • Posts: 133
500672 Hose connector
« on: December 04, 2019, 11:18 AM »
Will this new connector fit an "old", (no fabric on it) straight (not tapered) 27 mm AS hose?  This new fitting on the new hose is really nice for connecting hoses (both 27 and 36 mm hose ends fit into it) and I would like to replace the existing ends on my 27mm hoses.  But 500672 says it is for the tapered hose.  Does that mean it will only fit on the 32mm end of the new tapered hose and not fit the 27mm end of the older style hose?  Thanks.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline hemlock

  • Posts: 133
Re: 500672 Hose connector
« Reply #1 on: December 18, 2019, 04:39 PM »
Well, here is an example of the "ask festool" discussion not working and where hopefully you can help in the future, @DerickC.  I received no response from Festool on this post, so I called your customer service # and posed the same question as the post to them.  They asked what part number and then said, yes it will work on the 27mm non-tapered, non sheathed, hose. So I ordered 2 and just picked them up at my local woodcraft (30 minute drive each way), and guess what... they don't fit a 27mm non-tapered hose!  So, back they go--more down time and hassle.  Hopefully, @DerickC you can run these type of question to ground for us in the future, or correct the folks on your customer service phone line.  Looking forward to those days....