Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.
« previous next »
Pages: [1]   Go Down

Author Topic: MFT frame extension pieces?  (Read 7226 times)

0 Members and 1 Guest are viewing this topic.

Offline Sparktrician

  • Posts: 4437
MFT frame extension pieces?
« on: November 01, 2010, 08:02 AM »
I was looking at the Noden Adjust-a-Bench site (http://www.adjustabench.com/gallery_beckerink_m.asp) and in the gallery page I noticed an adaptation of what I surmise to be the older version of the MFT with extended long rails and three MDF tops mounted to the Asjust-a-Bench legs.  Are these extended side rails available for the current model MFT? 

 [smile] 
Logged
- Willy -

  "Show us a man who never makes a mistake and we will show a man who never makes anything. 
  The capacity for occasional blundering is inseparable from the capacity to bring things to pass."

 - Herman Lincoln Wayland (1830-1898)
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8423
    • Festool USA
Re: MFT frame extension pieces?
« Reply #1 on: November 01, 2010, 08:07 AM »
Willy, you should be able to get replacement rails. But we do not have rails longer than the ones that come on the MFT/3.
Logged

Offline Sparktrician

  • Posts: 4437
Re: MFT frame extension pieces?
« Reply #2 on: November 01, 2010, 08:18 AM »
I knew I could get replacements, Shane, but I was looking to build an extended version of the MFT like the one I saw.  Do you know if the extended rails are something made, but just NAINA? 

 [smile]
Logged
- Willy -

  "Show us a man who never makes a mistake and we will show a man who never makes anything. 
  The capacity for occasional blundering is inseparable from the capacity to bring things to pass."

 - Herman Lincoln Wayland (1830-1898)

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8423
    • Festool USA
Re: MFT frame extension pieces?
« Reply #3 on: November 01, 2010, 08:20 AM »
I'm not completely familiar with all of the offerings outside of the NA, but I believe there are longer profiles offered elsewhere.
Logged

Offline Sparktrician

  • Posts: 4437
Re: MFT frame extension pieces?
« Reply #4 on: November 01, 2010, 08:58 AM »
Thanks, Shane.  Looks like some investigation will be in the works here. 

 [smile]
Logged
- Willy -

  "Show us a man who never makes a mistake and we will show a man who never makes anything. 
  The capacity for occasional blundering is inseparable from the capacity to bring things to pass."

 - Herman Lincoln Wayland (1830-1898)

Offline Roseland

  • Posts: 684
Re: MFT frame extension pieces?
« Reply #5 on: November 01, 2010, 09:29 AM »
Logged
TS55, MFT/3, OF1400, OF1010, CT26, RS100, ETS125, CXS, MFS400, DF-500, Zobos.

Offline Sparktrician

  • Posts: 4437
Re: MFT frame extension pieces?
« Reply #6 on: November 01, 2010, 09:36 AM »
Logged
- Willy -

  "Show us a man who never makes a mistake and we will show a man who never makes anything. 
  The capacity for occasional blundering is inseparable from the capacity to bring things to pass."

 - Herman Lincoln Wayland (1830-1898)

Offline WarnerConstCo.

  • Posts: 4190
    • Warner Mill Works
Re: MFT frame extension pieces?
« Reply #7 on: November 01, 2010, 09:43 AM »
I would buy the shorter one's here and have some one tig weld them together.
Logged

Offline aafoote

  • Posts: 16
Re: MFT frame extension pieces?
« Reply #8 on: December 21, 2010, 12:04 AM »
they might be at Japan woodworker site. under mft/3 tables and accessories. Called Table Profile long 2x. part MFT 488555 (price for a pair $195.) Their length is 79". Information is sketchy. I don't know how it would set up but you can see them there.
Logged
primary Festool source: Toolsforworkingwood.com

Offline Corwin

  • Posts: 2624
Re: MFT frame extension pieces?
« Reply #9 on: December 21, 2010, 12:14 AM »
Quote from: aafoote on December 21, 2010, 12:04 AM
they might be at Japan woodworker site. under mft/3 tables and accessories. Called Table Profile long 2x. part MFT 488555 (price for a pair $195.) Their length is 79". Information is sketchy. I don't know how it would set up but you can see them there.

Part number 488555 is for the pair of 79" (2000mm) table profiles for the older MFT -- these profiles do NOT fit the newer MFT/3 tables.
Logged
Pages: [1]   Go Up
« previous next »